مجله آب و فاضلاب

مجله آب و فاضلاب

طراحی و توسعه حسگر نرم‌افزاری مبتنی بر هوش مصنوعی برای پیش‌بینی ظرفیت جذب تعادلی در فرایندهای جذب فاضلاب با استفاده از بیوچار

نوع مقاله : مقاله پژوهشی

نویسندگان
1 گروه کامپیوتر، واحد خرم‌آباد، دانشگاه آزاد اسلامی، خرم‌آباد، ایران
2 دانشکده هوش مصنوعی، دانشگاه آزاد اسلامی، واحد تهران شمال، تهران، ایران
3 دانشکده مهندسی شیمی، دانشگاه صنعتی نوشیروانی بابل، بابل، ایران
4 دانشکده شیمی، دانشگاه خواجه نصیرالدین طوسی، تهران، ایران
10.22093/wwj.2026.596574.3573
چکیده
مقدمه: افزایش آلودگی منابع آب، نیاز به روش‌های کارآمد برای ارزیابی و بهینه‌سازی جذب آلاینده‌ها در تصفیه فاضلاب را افزایش داده است. بیوچار جاذبی امیدبخش است، اما تعیین آزمایشگاهی ظرفیت جذب تعادلی (Q_e) زمان‌بر و پرهزینه است. ازاین‌رو، در این پژوهش یک مدل پیش‌بینی مبتنی بر هوش مصنوعی، در قالب نمونه اولیه حسگر نرم‌افزاری مبتنی بر داده‌های آزمایشگاهی، برای پیش‌بینی Q_e در سامانه‌های جذب مبتنی بر بیوچار توسعه داده شد.

مواد و روش‌ها: هشت مدل پیش‌بینی شامل پنج الگوریتم یادگیری ماشین (جنگل تصادفی، درختان فوق‌تصادفی، XGBoost، تقویت گرادیانی و پرسپترون چندلایه) و سه معماری یادگیری عمیق (1D-CNN، EnhancedResNet و FT-Transformer) با استفاده از مجموعه‌داده qe_biochar_ec شامل 3757 رکورد آزمایشگاهی آموزش و ارزیابی شدند. متغیرهای ورودی شامل شرایط عملیاتی و ویژگی‌های فیزیکوشیمیایی نظیر pH محلول، دما، زمان تماس، غلظت اولیه آلاینده، مقدار جاذب، سطح ویژه، مشخصات منافذ، ترکیب عنصری، نوع ماده اولیه بیوچار و نوع آلاینده بود. عملکرد مدل‌ها با R^2، RMSE و MAE ارزیابی و برای تفسیر مدل از SHAP استفاده شد. همچنین رابط FastAPI و داشبورد Streamlit به‌عنوان نمونه اولیه استقرار نرم‌افزاری توسعه یافت؛ اتصال مستقیم به حسگرهای برخط تصفیه‌خانه در این پژوهش ارزیابی نشد.

نتایج: نتایج نشان داد که الگوریتم Extra Trees با ضریب تعیین R^2=0.8899 و مقادیر RMSE = 20.49 mg g^(-1) و MAE = 7.61 mg g^(-1)، بهترین عملکرد را در پیش‌بینی ظرفیت جذب ارائه داد. همچنین، مدل FT-Transformer با R^2=0.8587، بهترین عملکرد را در میان مدل‌های یادگیری عمیق به دست آورد. تحلیل SHAP نیز امکان شناسایی عوامل مؤثر بر ظرفیت جذب و افزایش تفسیرپذیری مدل را فراهم کرد.

نتیجه‌گیری: مدل‌های هوش مصنوعی توانستند ظرفیت جذب تعادلی را با دقت مناسب پیش‌بینی کنند و می‌توانند نیاز به تکرار برخی آزمایش‌های تعادلی را کاهش دهند. با این حال، سامانه حاضر باید یک نمونه اولیه پیش‌بینی مبتنی بر داده‌های آزمایشگاهی تلقی شود و نه یک حسگر صنعتی برخطِ اعتبارسنجی‌شده. استفاده برای پایش بلادرنگ، کنترل فرایند یا دوقلوی دیجیتال مستلزم اعتبارسنجی آینده‌نگر با داده‌های زمانی در مقیاس پایلوت یا صنعتی و اتصال به سامانه‌های اندازه‌گیری و اطلاعاتی تصفیه‌خانه است.
کلیدواژه‌ها

عنوان مقاله English

Design and Development of an Artificial Intelligence-Based Soft Sensor for Predicting Equilibrium Adsorption Capacity in Biochar-Based Wastewater Adsorption Processes

نویسندگان English

Farid Azizi 1
vahid chegeni 1
saeed alikhani 2
Mehdi hussainzadeh 3
mojtaba azizi 4
1 ​Department of computer, Khor. C., Islamic Azad University, Khorramabad, Iran
2 Department of Artificial Intelligence, Islamic Azad University North Tehran Branch, Tehran, Iran
3 Department of Chemistry Engineering, Babol Noshirvani University of Technology, Babol, Iran
4 Department of Chemistry, K.N. Toosi University of Technology, Tehran, Iran
چکیده English

Introduction: The increasing contamination of water resources has intensified the need for efficient approaches to evaluate and optimize pollutant adsorption in wastewater treatment. Biochar is a promising adsorbent, but experimental determination of equilibrium adsorption capacity (Q_e) is time-consuming and costly. This study therefore develops a data-driven artificial intelligence model, framed as a laboratory-data-based soft-sensor prototype, for predicting Q_e in biochar-based adsorption systems.

Materials and Methods: Eight predictive models—five machine learning algorithms (Random Forest, Extra Trees, XGBoost, Gradient Boosting, and Multi-Layer Perceptron) and three deep learning architectures (1D-CNN, EnhancedResNet, and FT-Transformer)—were trained and evaluated using the qe_biochar_ec dataset containing 3,757 experimental records. Inputs include operating conditions and physicochemical descriptors such as solution pH, temperature, contact time, initial pollutant concentration, adsorbent dosage, specific surface area, pore characteristics, elemental composition, feedstock type, and pollutant type. Performance was evaluated using R^2, RMSE, and MAE, and SHAP was used for model interpretation. A FastAPI interface and Streamlit dashboard were also developed as a prototype deployment layer; direct connection to online plant sensors was not evaluated in this study.

Results: The results demonstrated that the Extra Trees algorithm achieved the best predictive performance, with an R^2 value of 0.8899, an RMSE of 20.49 mg g^(-1), and an MAE of 7.61 mg g^(-1). Furthermore, FT-Transformer achieved the highest performance among the deep learning models, with an R^2 of 0.8587. SHAP analysis enabled the identification of the most influential factors affecting adsorption capacity and provided greater insight into the model's predictions.

Conclusion: The results show that AI models can predict equilibrium adsorption capacity with useful accuracy and may reduce reliance on repeated laboratory equilibrium tests. The present system should be interpreted as a laboratory-data-based predictive soft-sensor prototype rather than a validated online industrial sensor. Its use for real-time monitoring, process control, or digital-twin applications requires prospective validation with time-resolved pilot- or full-scale plant data and integration with online measurements and plant information systems.

کلیدواژه‌ها English

Soft sensor
Artificial intelligence
Machine learning
Deep learning
Wastewater treatment
Biochar
Equilibrium adsorption capacity

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 01 آذر 1405