مهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593630120190321Risk Assessment of the Urban Runoff Collection Networks Using Spatial Multi Criteria Decision-Making (Case Study: District 11 of Tehran)تحلیل ریسک شبکههای جمعآوری رواناب شهری با استفاده از تصمیمگیری چند معیاره مکانی (مطالعه موردی: منطقه 11 تهران)1176324410.22093/wwj.2017.90371.2435FAریحانه شریعتدانشجوی کارشناسی ارشد مهندسی منابع آب، گروه مهندسی آبیاری و زهکشی، پردیس ابوریحان، دانشگاه تهران، تهران، ایرانعباس روزبهانیاستادیار گروه مهندسی آبیاری و زهکشی، پردیس ابوریحان، دانشگاه تهران، تهران، ایران0000-0002-8458-4538علی ابراهیمیاناستاد پژوهشی، گروه مهندسی عمران و محیط زیست٬ دانشگاه ویلانوا، ایالات متحده آمریکاJournal Article20170623Urban runoff management as well as collecting and transferring surface waters are the major concerns for officials and managers in urban affairs. The Multiple components of runoff drainage systems, the close interrelationships between the functionalities of the components and the relationship between the runoff collection network and the individual and social assets within the cities lead to a doubled complication in management plans. Flooding risk is generally subjected to numerous factors and the integrated management of these factors makes the urban runoff management a multi-criteria problem. The current research offers a comprehensive method for risk management in management of surface water collection networks. The necessary measures taken to implement this method include modeling the study area in Autodesk SSA software, specifying the layer of hydrology, hydraulics, social, traffic, environment, urban appearance and structures. Weights were extracted from the ideas inquired from the urban affairs experts and based on AHP multi criteria decision-making. Eventually, the map for canals’ flooding risk was generated by taking advantage of GIS capabilities and spatial MCDM methods such as SAW and TOPSIS. The implementation of the proposed method on degree 3 and degree 4 canals in District 11 of the Tehran Municipality is indicative of high and very high flooding risks for a length of about 6% to 9% of the total canals<strong>مدیریت رواناب شهری و جمعآوری و هدایت آبهای سطحی یکی از دغدغههای اصلی مسئولان و مدیران امور شهری است. اجزای متعدد شبکه زهکشی رواناب، ارتباط تنگاتنگ عملکرد اجزا با یکدیگر و ارتباط این شبکه با داراییهای فردی و اجتماعی در شهرها، منجر به پیچیدگی مدیریت آن میشود. بهطور کلی ریسک آبگرفتگی تحت تأثیر عوامل متعددی است که مدیریت یکپارچه این عوامل، مسئله مدیریت رواناب شهری را به یک مسئله چند معیاره تبدیل میکند. در این پژوهش روشی جامع بهمنظور مدیریت ریسک شبکههای جمعآوری آبهای سطحی ارائه شد. اقدامات لازم بهمنظور پیادهسازی این روش شامل مدلسازی منطقه مورد مطالعه در نرمافزار </strong><strong>Autodesk SSA</strong><strong>، </strong><strong>است و شامل </strong><strong>تعریف لایههای هیدرولوژیکی و هیدرولیکی، اجتماعی، ترافیکی، زیستمحیطی، سیمای شهری و سازهای و زیرلایههای لازم، استخراج وزن آنها با استفاده از نظرات متخصصان امور شهری و با استفاده از روش تصمیمگیری چندمعیاره </strong><strong>AHP</strong><strong> و در نهایت تهیه نقشه ریسک آبگرفتگی در کانالها با استفاده از قابلیتهای </strong><strong>GIS</strong><strong> و روشهای تصمیمگیری چند معیاره </strong><strong>SAW</strong><strong> و </strong><strong>TOPSIS</strong><strong> بهصورت مکانی است. اجرای روش ارائه شده در این پژوهش در مورد کانالهای درجه 3 و 4 منطقه 11 شهرداری تهران نشان دهنده ریسک آبگرفتگی زیاد و خیلی زیاد برای 6 تا 9 درصد طول کل کانال است.</strong>https://www.wwjournal.ir/article_63244_d57c941ba129cb025f2bc301e36e2ffa.pdfمهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593630120190321Developing the Performance of Sewage Pipelines Repairing Using Trenchless Methods (Case Study: Isfahan)توسعه عملکرد روشهای تعمیر خطوط لوله فاضلاب به کمک روشهای نوین حفاریهای بدون ترانشه (مطالعه موردی: شهر اصفهان)18316324310.22093/wwj.2017.96690.2479FAفرزاد کریمیاندانشجوی کارشناسی ارشد مهندسی آب و سازه هیدرولیکی، گروه عمران، دانشکده مهندسی عمران و حمل و نقل، دانشگاه اصفهان، اصفهان، ایرانرامتین معینیاستادیار، گروه عمران، دانشکده مهندسی عمران و حمل و نقل، دانشگاه اصفهان، اصفهان، ایرانمحمد رضا زارعاستادیار، گروه عمران، دانشکده مهندسی عمران و حمل و نقل، دانشگاه اصفهان، اصفهان، ایرانJournal Article20170828Nowadays, the using modern trenchless methods for repairing sewer networks have been developed in most countries. Generally, for repairing the sewage lines using trenchless methods, bypassing the repair zone is necessary. For this purpose, the damaged tube is blocked upstream of the damaged pipe using plugs and packers, and to prevent rejection, the sewage is pumped to the downstream pipes. However, the pumping of sewage is a very costly task. In this study, an effective method named “minimum pumping” (MP) is suggested using the capacity of the upstream pipes and manholes. In the proposed method, the timing needed to repair the damaged tube can be managed in a way that the cost of pumping is reduced. Here, as a case study, sewage pipes in Nazar Boulevard and Mirzakochek Khan Boulevard in Isfahan City in Iran have been repaired using the proposed method and the results are presented and analyzed. The results indicated that the proposed method is an effective method for reducing the cost of repairing in sewage networks. Using the proposed method, the pumping rate and, consequently its costs, were reduced from 35% to 50% for Nazar Boulevard sewer network and from 70% to 85% for Mirzakochek Khan Boulevard.<strong>امروزه استفاده از روشهای مدرن نظیر روش حفاری بدون ترانشه برای تعمیر شبکه فاضلاب، در اغلب کشورهای دنیا توسعه یافته است. در برخی از روشهای تعمیر و نوسازی بدون ترانشه در خطوط لوله فاضلاب، انسداد لوله فاضلاب بالادست و پمپاژ فاضلاب به لولههای پایین دست ضروری است. به این منظور بالادست لوله آسیبدیده به کمک تجهیزاتی به نام پلاگ و پکر مسدود میشود و سپس برای جلوگیری از پسزدگی، فاضلاب به سمت لولههای پاییندست پمپاژ میشود که با توجه به میزان و زمان پمپاژ، این انتقال بسیار هزینهبر است. در این پژوهش روشی به نام "پمپاژ حداقلی" (</strong><strong>MP</strong><strong>) پیشنهاد شد که با بهرهگیری از ظرفیت لولهها و آدمروهای بالادست زمان مورد نیاز برای تعمیر لوله آسیبدیده فراهم شود و در نتیجه هزینه پمپاژ کاهش یابد. در این پژوهش بهعنوان مطالعه موردی، لولههای فاضلاب چهارراه نظر و بلوار میرزاکوچکخان اصفهان با استفاده از روش پیشنهادی تعمیر شد و نتایج بهدست آمده مورد تجزیه و تحلیل قرار گرفت.</strong> <strong>نتایج نشاندهنده قابلیتهای روش پیشنهادی در کاهش هزینه تعمیر شبکههای فاضلاب شهرها است. با استفاده از روش پیشنهادی میزان پمپاژ و در نتیجه هزینه آن، در منطقه چهارراه نظر شهر اصفهان بین 35 تا 50 درصد و در منطقه بلوار میرزاکوچکخان شهر اصفهان بین 70 تا 85 درصد کاهش یافت.</strong>https://www.wwjournal.ir/article_63243_267b0374ec82ddf0a06ad5fee9895d3b.pdfمهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593630120190321Extracting Sustainable Urban Water Policies with Dynamic System Approach (Case Study: Qom City)استخراج سیاستهای پایدار آب شرب شهری با رویکرد پویایی سیستم (مطالعه موردی: شهر قم)32497999910.22093/wwj.2018.97800.2488FAحسن فرمانی انتظامدانشجوی دکترای دانشکده مهندسی صنایع، واحد تهران مرکز، دانشگاه آزاد اسلامی، تهران، ایران0000-0002-2917-670Xفرزاد موحدی سبحانیاستادیار گروه مهندسی صنایع، دانشکده فنی و مهندسی، دانشگاه آزاد اسلامی، واحد علوم و تحقیقات تهران، تهران، ایرانمهسا واعظ تهرانیرئیس گروه بهرهبرداری آب، معاونت راهبری و نظارت بر بهرهبرداری، شرکت مهندسی آب و فاضلاب کشور، تهران، ایرانسید اسماعیل نجفیاستادیار دانشکده مهندسی صنایع دانشگاه آزاد اسلامی، واحد علوم و تحقیقات تهران، تهران، ایرانJournal Article20170909Qom city (located in the central desert of Iran) has always faced the problem of water shortage. In recent years, due to various reasons such as urbanization, increased immigration and tourism prosperity, this problem has become a more serious trending water crisis. In spite of the steps taken to maintain the sustainability of potable water, predictions indicated that if the existing situation persists, in 2022 the city will be in a state of unstable water. To overcome this dilemma, this paper aims to identify and present sustainable urban Potable water policies on a thirty-year horizon through system dynamics and the use of Vensim software. These policies are generally presented in two parts: Supply and Demand. The supply policies include separation of potable water from non potable water, using fresh water or wastewater, and managing the water supply losses. In demand management, the policies are to control the population, control the pattern of domestic demand, and control the Exempt Demand. The new policy investigated and proposed by this research which is proportional to the problem was the separation of potable water from non potable water and control the exempt demands over time and their impact on the sustainability of urban potable water.<strong>شهر </strong><strong>قم بهدلیل موقعیت جغرافیایی و واقع شدن در کویر مرکزی ایران همواره با مشکل کمبود آب روبرو بوده است و در سالهای اخیر به دلایل مختلف از جمله</strong><strong>گسترش شهرنشینی، افزایش مهاجرت و رونق گردشگری، این مشکل تبدیل به بحران شده است. با وجود اقدمات انجام شده بهمنظور پایداری آب شرب از جمله انتقال آب از سر شاخههای دز به قمرود، پیشبینیها نشان میدهد در صورت ادامه وضعیت موجود، در سال 1401، این شهر در شرایط ناپایداری آبی قرار خواهد گرفت. برای رفع این معضل، در این پژوهش با بهکارگیری پویایی سیستم و استفاده از نرمافزار </strong><strong>Vensim</strong><strong> ، سیاستهای پایداری آب شرب شهری در یک افق سی ساله شناسایی و ارائه شد. در چنین پژوهشهایی، این سیاستها اصولاً در دو بخش ارائه میشود: بخش عرضه که عبارت</strong><strong>است از جداسازی آب شرب از آب غیر شرب، استفاده از پساب یا آب جدید و مدیریت تلفات شبکه آبرسانی؛ و بخش تقاضا که عبارت است از کنترل جمعیت، کنترل الگوی مصارف خانگی و کنترل مصارف معاف از قیمت. اما سیاست تازه و متناسب با این مشکل که در این پژوهش بررسی و پیشنهاد شده است، عبارت است از جداسازی آب شرب از آب بهداشتی و کنترل مصارف کاربریهای معاف از قیمت و تأثیر آنها بر پایداری آب شرب شهری.</strong>https://www.wwjournal.ir/article_79999_ff2d9dc6c749a7d35142d0ca3c5a71a9.pdfمهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593630120190321Evaluation of Water and Wastewater Company Performance by Using Balanced Scorecard Model
)Case Study: West Azarbayjan Water and Wastewater Company(ارزیابی عملکرد شرکتهای آب و فاضلاب با مدل کارت امتیاز متوازن مطالعه موردی: شرکت آب و فاضلاب شهری استان آذربایجان غربی50638148810.22093/wwj.2018.80527.2369FAرحیم دباغاستادیار، دانشکده مهندسی صنایع، دانشگاه صنعتی ارومیه، ارومیه، ایرانساناز احمدیدانشجوی کارشناسی ارشد، دانشکده مهندسی صنایع، دانشگاه صنعتی ارومیه، ارومیه، ایرانJournal Article20170510Comprehensive evaluation of organization performance is one of the most powerful tools for decision making. It helps managers to gain necessary information about the status of their organization. One of the most widely welcomed models in this regard is the Balanced Scorecard Model which provides comprehensive evaluation for various aspects in the Water and Wastewater Corporation. The present study was a descriptive-applied research in terms of objectives. The objectives included selecting a comprehensive evaluation pattern, recognizing and ranking the indexes and main sub-standards for evaluating the comprehensive performance with BSC model denoting various parts in water and wastewater corporations. The model was used in West Azarbayjan province water and wastewater company as a pilot. Data collection was based on the library and field study via 3 types of questionnaires and interview with staff, financial staff, and by the customers of the given company. Based on the correlation and regression coefficients, the mean variables test and the fuzzy method showed that the BSC fields are in the order of priority in the performance of the mentioned company. These included internal processes, learning and growth, and customer and financial perspective. In the regression dependent variable model, the performance of the company and independent variables included various variables in fields of the balanced scorecards, and the result showed that the most effective factors on the company performance were decreasing the unnecessary costs, increasing and developing new facilities, finding new custumers, providing infrastructures, and organizational resources through learning, increasing customer satisfaction, enhancing the efficiency and quality of the internal processes.<strong>یکی از ابزارهای قدرتمند برای تصمیمگیری مدیران، ارزیابی جامع عملکرد سازمانهاست که اطلاعات ضروری و مورد نیاز هر سازمان را در اختیار آن قرار میدهد. یکی از مدلهایی که برای ارزیابی جامع جنبههای مختلف شرکتهای آب و فاضلاب با استقبال گستردهای مواجه شده، مدل کارت امتیازی متوازن (</strong><strong>BSC</strong><strong>) است. این پژوهش از نوع توصیفی-کاربردی است و اهداف آن شامل انتخاب الگوی جامع ارزیابی، شناسایی و رتبهبندی شاخصها و زیرمعیارهای اصلی برای ارزیابی عملکرد جامع با مدل </strong><strong>BSC</strong><strong> است که با تفکیک حوزههای مختلف شرکتهای آب و فاضلاب و بهکارگیری آنها بهصورت پایلوت در شرکت آب و فاضلاب شهری استان آذربایجان غربی انجام شده است. دادههای این پژوهش از بررسی مطالعات کتابخانهای و میدانی سه نوع پرسشنامه و مصاحبه از کل کارمندان، کارمندان مالی و مشتریان شرکت آب و فاضلاب شهری جمعآوری شد. نتایج بر اساس ضرایب همبستگی و رگرسیون، آزمون میانگین متغیرها و روش فازی نشان میدهد که عملکرد شرکت بهترتیب اولویت در حوزههای </strong><strong>BSC</strong><strong> شامل فرایندهای داخلی، رشد و یادگیری، مشتری و دیدگاه مالی میباشند. در مدل رگرسیونی متغیر وابسته عملکرد شرکت و متغیرهای مستقل، شامل متغیرهای مختلف در حوزههای کارت امتیاز متوارن است. نتایج نشان داد که بیشترین میزان عوامل مؤثر بر عملکرد شرکت مورد مطالعه بهترتیب شامل کاهش هزینههای غیرضروری، افزایش و توسعه امکانات جدید، بهدست آوردن مشتریان جدید، فراهمسازی زیرساختها و منابع سازمانی، توسعه شایستگیها از طریق آموزش، افزایش رضایتمندی مشتریان، ارتقای کارایی و راندمان و کیفیت در فرایندهای داخلی است.</strong>https://www.wwjournal.ir/article_81488_e2418b506112de80030ae0bd0054836f.pdfمهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593630120190321Prediction of Peak Velocity of Pollutant Transport in Rivers Using Group Method Data Handling (GMDH) and Intelligent Hybrid Method GMDH-HSپیشبینی سرعت پیک آلودگی در رودخانه با استفاده از روش GMDH و روش هوشمند تلفیقی GMDH-HS64768142510.22093/wwj.2018.83092.2389FAالهام گل کاردانشجوی سازههای آبی، بخش مهندسی آب، دانشکده کشاورزی، دانشگاه شهید باهنر کرمان، کرمان، ایرانمحمد مهدی احمدیاستادیار بخش مهندسی آب، دانشکده کشاورزی، دانشگاه شهید باهنر کرمان، کرمان، ایرانکورش قادریدانشیار بخش مهندسی آب، دانشکده کشاورزی، دانشگاه شهید باهنر کرمان، کرمان، ایرانمجید رحیم پوردانشیار بخش مهندسی آب، دانشکده کشاورزی، دانشگاه شهید باهنر کرمان، کرمان، ایرانJournal Article20170424Estimating of the peak velocity of pollutant in a flow using hydraulic and geometrical parameters is very important in predicting the pollution transport in rivers. Suitable empirical equations are developed, none of which is reliable enough in estimating the peak velocity of pollutant before a thorough calibration. So, in this research artificial intelligence methods are used for this purpose. The objective of this research was to predict the peak velocity of pollutant by Group Method Data Handling (GMDH) methods and an intelligent hybrid method (GMDH-HS). The result of these methods were compared to the best regression equation. The dimensionless relative discharge (Q'a), dimensionless drainage area, the ratio of discharge at the section at the time of measurement to drainage area (Q/Da) and the reached slope (S) were taken as input parameters to these models. These data were collected from several different rivers in the United States. Mackey-Glass standard function was used to evaluate the performance of the GMDH and GMDH-HS models. The results indicated that the proposed models predicted the peak velocity of pollutant precisely (CE GMDH =0.9328, CE GMDH-HS =0.9038 & CE Vp Equation=0.3802) and these models are more accurate compared to the best nonlinear regression equation..<strong>تخمین مشخصات ماده آلوده کننده با استفاده از پارامترهای هندسی و هیدرولیکی جریان، یکی از عوامل مؤثر در پیشبینی انتقال آلودگی در رودخانهها است. روشهای عددی و تحلیلی مناسبی برای شبیهسازی انتقال و پخش آلودگی توسعه داده شده، اما هیچ یک از آنها قبل از کالیبره کردن با اطمینان قابل استفاده نیستند. بنابراین ساخت مدلی که بتواند با سرعت بیشتر و با اطلاعات کلی، انتقال آلودگی را پیشبینی کند، ضروری به نظر میرسد. از جمله روشهای جدیدی که برای مدلسازی پیشبینی رفتار پدیدهها استفاده میشوند، روشهای هوشمند داده محور میباشند. در این پژوهش پیشبینی سرعت پیک آلودگی توسط دو مدل برخورد گروهی با دادهها </strong><strong>(GMDH)</strong><strong> و مدل هوشمند تلفیقی </strong><strong>(GMDH-HS)</strong><strong> صورت گرفت. بنابراین دو مدل با کد نویسی در نرمافزار </strong><strong>MATLAB</strong><strong> بر مبنای دو روش ساخته و بهکار گرفته شدند. پارامترهای ورودی به این مدلها شامل دبی نسبی بیبعد (</strong><strong>Q'a</strong><strong>)، سطح نفوذ بیبعد (</strong><strong>D'a</strong><strong>)، نسبت دبی به سطح نفوذ بیبعد و شیب رودخانه (</strong><strong>S</strong><strong>) بود. بهمنظور صحتسنجی مدلهای استفاده شده از تابع استاندارد </strong><strong>Mackey-Glass</strong><strong> استفاده شد. نتایج کاربرد دو مدل حاکی از عملکرد مناسب، دقت بالای هر دو مدل به ویژه مدل </strong><strong>GMDH</strong><strong> و افزایش دقت محاسبه سرعت پیک آلودگی به میزان حدودا</strong><strong>ً</strong><strong> 52 درصد نسبت به بهترین معادله رگرسیونی بود.</strong>https://www.wwjournal.ir/article_81425_733ac220398ff94cba8063c8bc11ff7d.pdfمهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593630120190321Treatability of Carwash Wastewater by Application of Combined Chemical Coagulation and UV/H2O2 Processesبررسی تصفیهپذیری فاضلاب کارواش با کاربرد فرایندهای ترکیبی انعقاد و UV/H2O277856344810.22093/wwj.2017.77993.2351FAمهران محمدیان فضلیدانشیار گروه مهندسی بهداشت محیط، دانشکده بهداشت، دانشگاه علوم پزشکی زنجان، زنجان، ایرانشیوا ذبیحیدانش آموخته کارشناسی ارشد مهندسی بهداشت محیط، دانشکده بهداشت، دانشگاه علوم پزشکی زنجان، زنجان، ایرانعلی اسدیدانشیار گروه مهندسی بهداشت محیط، دانشکده بهداشت، دانشگاه علوم پزشکی زنجان، زنجان، ایرانJournal Article20170707In recent years, the increase in car production, population growth, urbanization and significant expansion of the use of private vehicles has led to the development of more and more carwash facilities in all cities. Regarding the carwash wastewater pollutants, treatment of such wastewater can be a big help in protecting surface and groundwater resources. The wastewater needed for this research was taken from the output of carwash using hand washing method and composite sampling. The aim of this study was to determine the efficiency of combined chemical coagulation and UV/H<sub>2</sub>O<sub>2</sub> processes in treatment of carwash wastewater. To reduce the settleable solids, samples underwent a 2-hour settlement. Then in the first step of coagulation process, the optimum conditions for pH and the ferric chloride dose were obtained using jar test. The effluent of coagulation stage was introduced to UV/H<sub>2</sub>O<sub>2</sub> reactor under the influence of ultraviolet radiation. Finally, required parameters such as COD and BOD<sub>5</sub> in the effluent of oxidation process were measured at the designated times. Results showed that the COD removal efficiency of 70% and 93.2% was achieved in coagulation and UV/H<sub>2</sub>O<sub>2</sub> process, respectively. The overall efficiency of this system based on COD and BOD<sub>5</sub> removal was obtained as 98% and 97.5%, respectively. Overall, the recommended combined system is effective and robust to treat carwash wastewater to meet the standards of effluent discharge.<strong>با توجه به آلایندههای موجود در فاضلاب کارواشها، تصفیه فاضلاب ناشی از این صنعت کمک بزرگی به حفظ منابع آب سطحی و زیرزمینی است. این پژوهش با هدف تعیین کارایی سیستم انعقاد و </strong><strong>UV/H<sub>2</sub>O<sub>2</sub></strong><strong> در تصفیه فاضلاب کارواش انجام شد. فاضلاب استفاده شده در این پژوهش از خروجی نهایی کارواش خودروهای سبک با روش شست و شوی دستی تهیه شد و نمونهبرداری بهصورت مرکب انجام شد. بهمنظور مطالعه تصفیهپذیری فاضلاب، ابتدا نمونه بهمنظور تهنشینی و کاهش </strong><strong>TSS</strong><strong> بهمدت 2 ساعت به حال سکون نگه داشته شد. در مرحله اول تصفیه با انجام فرایند انعقاد با کمک دستگاه جارتست، بهینهسازی </strong><strong>pH</strong><strong> و دز کلرورفریک انجام شد. سپس نمونهها وارد راکتور </strong><strong>UV/H<sub>2</sub>O<sub>2</sub></strong><strong> شد و تحت تأثیر پرتوی فرابنفش قرار داده شد. نهایتاً مقادیر پارامترهای مورد نظر مانند </strong><strong>COD</strong><strong> و </strong><strong>BOD<sub>5</sub></strong><strong> در پساب خروجی از فرایند اکسیداسیون در زمانهای تعیین شده سنجش شد. یافتهها نشان داد که راندمان حذف </strong><strong>COD</strong><strong> در فرایند انعقاد و </strong><strong>UV/H<sub>2</sub>O<sub>2</sub></strong><strong> بهترتیب برابر با 70 و 2/93 درصد بود. راندمان کلی سیستم تصفیه ترکیبی بر مبنای </strong><strong>COD</strong><strong> و </strong><strong>BOD<sub>5</sub></strong><strong> بهترتیب برابر با 98 و 5/97 حاصل شد و مشخص شد که سیستم پیشنهاد شده یک روش مؤثر در تصفیه فاضلاب کارواش و تأمین استانداردهای تخلیه پساب است.</strong>https://www.wwjournal.ir/article_63448_24a627882a6c6c8592d4a3930cc35e51.pdfمهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593630120190321Synthesis and Surface Modification of Hexagonal Mesoporous Silicate–HMS using Chitosan for the Adsorption of DY86 from Aqueous Solutionسنتز و اصلاح سطح ترکیب سیلیکاتی میان حفره شش وجهی HMS با کیتوزان بهمنظور حذف رنگزای زرد مستقیم 86 از محلول آبی861008152310.22093/wwj.2018.97745.2486FAمهسا آقاپوردانش آموخته کارشناسی ارشد مهندسی شیمی، گروه مهندسی شیمی، واحد قائمشهر، دانشگاه آزاد اسلامی، قائمشهر، ایراناحسان بینائیاناستادیار مهندسی شیمی، گروه مهندسی شیمی، واحد قائمشهر، دانشگاه آزاد اسلامی، قائمشهر، ایرانآرش کامران پیرزماناستادیار مهندسی شیمی، دانشکده مهندسی شیمی، دانشگاه علم و فناوری مازندران، بهشهر، ایرانJournal Article20170909Many types of dyes are toxic, carcinogenic, non-biodegradable due to their complex aromatic structures and their water solubility and accordingly, they should be removed from wastewaters. In the present research, hexagonal mesoporous silicate HMS was synthesized by sol-gel method and after modification by natural polymer chitosan (Ch-HMS), it was applied for the removal of direct yellow 86 from aqueous media. The characterization of synthesized HMS and chitosan modified HMS were analyzed by some basic analyses such as SEM, FTIR, XRD and BET. The effects of pH, adsorbent dosage and contact time on the removal of direct yellow 86 were investigated. The results revealed that the maximum adsorption of dye was about 92% which was obtained by 0.075 g of Ch-HMS composite at the pH of 2 and for 60 min contact time. The equilibrium data of experiments were studied by Langmuir, Freundlich, Elovich and Temkin isotherm models using linear regression. The Langmuir model with the maximum adsorption capacity of 71.43 mg/g was the predominant model. Kinetic study was also performed using pseudo first and pseudo second order kinetic models where the second order model had the best agreement with the experimental data. The experimental data showed that surface modification of HMS by chitosan and formation of Ch-HMS nanocomposite enhanced the adsorption capacity of HMS and changed it into a useful and powerful adsorbent for the removal of pollutants from aqueous solutions.<strong>بسیاری از رنگها بهعلت ترکیب پیچیده آروماتیک و انحلال زیاد در آب، سم</strong><strong>ّ</strong><strong>ی، سرطانزا و زیست تخریب ناپذیرند، بنابراین حذف آنها از پساب حائز اهمیت است. در این پژوهش، سیلیکات میان حفره با ساختار شش وجهی منظم بهروش سل-ژل سنتز شد و پس از اصلاح سطح آن با کیتوزان (</strong><strong>Ch-HMS</strong><strong>)، بهعنوان جاذب برای حذف رنگ زرد مستقیم 86 استفاده شد. برای بررسی جاذب سنتزشده، از روشهای </strong><strong>SEM</strong><strong>،</strong><strong>FTIR </strong><strong>، </strong><strong>XRD</strong><strong> و </strong><strong>BET</strong><strong> استفاده شد. تأثیر پارامترهایی مانند </strong><strong>pH</strong><strong>، مقدار جاذب و زمان تماس بر راندمان حذف رنگ بررسی شد. نتایج نشان داد که حدود 92 درصد رنگ با استفاده از 075/0 گرم کامپوزیت در </strong><strong>pH</strong><strong> برابر 2 و در زمان تماس 60 دقیقه حذف شد. دادههای تعادلی جذب با استفاده از همدماهای لانگمیر، فروندلیچ، تمکین و الوویچ با کمک رگرسیون خطی مدلسازی شدند. همدمای لانگمیر بهترین تطابق را با دادههای آزمایشگاهی با ظرفیت 71/43 میلیگرم بر گرم داشت. در این پژوهش مشخص شد که اصلاح سطح </strong><strong>HMS</strong><strong> با کیتوزان و سنتز نانوکامپوزیت، موجب افزایش ظرفیت جذب رنگ بر روی آن میشود و </strong><strong>این جاذب میتواند </strong><strong>بهعنوان یک جاذب کارآمد و قوی برای حذف آلایندهها از محیطهای آبی استفاده شود.</strong>https://www.wwjournal.ir/article_81523_ef24e876e74d61697384568de1c02278.pdfمهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593630120190321Efficiency Evaluation of Nitrate Removal from Synthetic Solutions by Dendrimer- Graphene Oxide Nano-Composite Activated with HClارزیابی کارایی نانوکامپوزیت فعال شده دندریمر-گرافن اکساید توسط HCl برای حذف نیترات از محلولهای سنتتیک1011168149610.22093/wwj.2018.67173.2275FAابوالقاسم علیقارداشیاستادیار گروه مهندسی محیط زیست، دانشکده مهندسی عمران، آب و محیط زیست، دانشگاه شهید بهشتی، تهران، ایرانزهرا کاشی تراش اصفهانیمحقق پسادکترای گروه مهندسی محیط زیست، دانشکده مهندسی عمران، آب و محیط زیست، دانشگاه شهید بهشتی، تهران، ایرانفرهود نجفیاستادیار، گروه پژوهشی رزین و افزودنیها، مؤسسه پژوهشی علوم وفناوری رنگ و پوشش، تهران، ایرانJournal Article20170911High soluability of nitrate ions in water cause the dysfunction of many existing treatment methods in the removal of this very dangerous ion from aqueous media. On the other hand, due to the need for in situ treatment methods, in particular for groundwater, the replacement of old inefficient methods with new compounds is required. In this study, for the first time, the efficiency of activated dendrimer- graphene oxide for nitrate removal from an aquatic solution was investigated. Experiments were performed in a batch reactor and the main factors of pH, reaction time, and concentration of PAMAM-GO were investigated. The highest removal efficiency was obtained as 90% at 0.025mg/L activated dendrimer- graphene oxide, pH of 7.5 and 15 min reaction time. The results showed that nitrate removal by activated dendrimer-graphene oxide is correlated with nanocomposite concentration, contact time, pH and initial concentration of nitrate. It seems that ion exchange between nitrate and chloride is the main mechanism of nitrate removal by activated dendrimer-graphene oxide according to functionalization of activated dendrimer-graphene oxide using hydrochloric acid. This method can be used as a suitable method for in situ removal of nitrate from water and wastewater due to the desirable ability of the nanocomposite and its optimal compatibility with the environment.<strong>انحلال زیاد یون نیترات در آب باعث عدم کارایی بسیاری از روشهای تصفیه موجود برای حذف این یون از محیطهای آبی شده است. بهدلیل نیاز به استفاده از روشهای تصفیه بهصورت درجا بهویژه در مورد آبهای زیرزمینی، جایگزینی روشهای ناکارآمد قدیمی با ترکیبات جدید امری ضروری است. در این پژوهش کارایی نانوکامپوزیت فعال شده دندریمر-گرافن اکساید در حذف نیترات از محیطهای آبی در مقیاس آزمایشگاهی و بهصورت پایلوت مورد بررسی قرار گرفت. بهمنظور عاملدار نمودن نانوکامپوزیت دندریمر-گرافن اکساید از اسید کلریدریک 20 درصد و برای فعالسازی آن از آون و سپس کوره استفاده شد. آزمایشها بهصورت ناپیوسته بر روی نمونههای سنتتیک و با تغییر فاکتورهای مؤثر در واکنش مانند غلظت نیترات، </strong><strong>pH</strong><strong>، زمان ماند و غلظت نانوکامپوزیت فعال شده دندریمر-گرافن اکساید صورت گرفت. غلظت باقیمانده نیترات محلول به روش اسپکتروفتومتری تعیین شد و کارایی حذف با استفاده از آزمون آماری </strong><strong>ONE WAY ANOVA</strong><strong> و نرمافزار </strong><strong>SPSS-16</strong><strong> مورد بررسی قرار گرفت. بیشترین راندمان حذف نیترات در غلظت 025/0 میلیگرم در لیتر نانوکامپوزیت فعال شده دندریمر-گرافن اکساید با </strong><strong>pH</strong><strong> برابر 5/7 و زمان ماند 15 دقیقه و به میزان 90 درصد برای نمونه با غلظت نیترات 45 میلیگرم در لیتر بهدست آمد. نتایج این پژوهش نشان داد که راندمان حذف نیترات توسط نانوکامپوزیت فعال شده دندریمر-گرافن اکساید با غلظت نانوکامپوزیت و زمان تماس، </strong><strong>pH</strong><strong> و غلظت اولیه نیترات رابطه دارد. با توجه به عاملدار نمودن نانوکامپوزیت دندریمر-گرافن اکساید توسط اسید کلریدریک، انجام تبادل یون، میان یون نیترات و یون کلر عامل اصلی حذف نیترات از محیط واکنش است. با توجه به توانایی مطلوب نانوکامپوزیت تولیدی، میتوان این روش را بهعنوان روشی مناسب بهمنظور تصفیه آبها یا پسابهای حاوی یون نیترات بهصورت درجا مورد استفاده قرار داد.</strong>https://www.wwjournal.ir/article_81496_0bc86e80dec4c31dbdf7c7baab888283.pdfمهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593630120190321Cadmium, Lead and Arsenic Remediation in Urban Wastewater by Sorghum Bicolor L.ضریب گیاهپالایی گیاه سورگوم شیرین در کاهش فلزات سنگین کادمیم، سرب و آرسنیک از پساب شهری1171298000110.22093/wwj.2018.90922.2443FAسید احمد شفیعی دارابیدانشجوی دکترای رشته فیزیولوژی گیاهی، گروه زیست شناسی، دانشکده علوم، دانشگاه اصفهان، اصفهان، ایرانعباس المدرسدانشیار گروه زیست شناسی، دانشکده علوم، دانشگاه اصفهان، اصفهان، ایرانJournal Article20170630The use of wastewater and gray water for agribusiness is recently growing, and it is essential to investigate the risks associated with its use. Heavy metals in wastewater, even in small quantities, are among problems limiting the use of wastewater in agriculture. This is due to the high agglomeration coefficient in the environment, degradability and long shelf-life which cause the severity of toxicity and contamination of the soil during irrigation. In this regard, the Phytoremediation technology can be advantageous due to its environmental compatibility and environmental refining power. In order to investigate the power of sweet sorghum, urban wastewater was used to irrigate the plant. First, wastewater was analyzed in terms of 38 factors. By adding cadmium, lead and arsenic to wastewater, three treatments of 0.1, 1 and 10 mg/l of these metals were created in urban wastewater and for 12 weeks the respective pots were irrigated with appropriate replication. Samples of root, stem, leaf, seed, soil and drainage of pots were collected separately for analysis of acid digestion and grafting to the atomic absorption system and the results were compared by statistical methods. The results showed that accumulation of cadmium and lead in sorghum is more than ten times higher than that of arsenic. On the other hand, the absorption coefficient or ability of the plant to absorb the elements has decreased rapidly for cadmium and lead with increasing concentration in the soil. In the case of arsenic, the absorption coefficient increased with increasing concentration in the soil. Regarding the amount of material accumulation, the ability of all tissues in the accumulation of cadmium and lead was the same and in the case of arsenic, the root accumulated more than aerial parts. This study showed that the heavy metals accumulation pattern in sorghum, the final amount of accumulation, the absorption coefficient and its changes relative to the environmental concentration are different for various elements. According to the final concentration of accumulation and absorption coefficient, the sorghum plant is suitable for the purification of cadmium and lead from low concentration effluents which are commonly found in urban wastewater. This can prevent the accumulation of these pollutants in soil.<strong>امروزه استفاده از پساب یا آب خاکستری برای کشاورزی بهشدت در حال گسترش است در حالی که استفاده از آنها خطراتی نیز بههمراه دارد. فلزات سنگین موجود در پساب حتی در مقادیر اندک بهدلیل ضریب تجمعپذیری بالا در محیط، عدم تجزیهپذیری و ماندگاری زیاد، شدت سمیت و آلودهسازی خاک در زمان آبیاری از جمله معضلات استفاده از پساب در کشاورزی است که باید به نحوی مدیریت شود. در این خصوص روش گیاهپالایی بهدلیل سازگاری با محیط زیست و قدرت پالایش محیط از مزیت مناسبی برخوردار است. بهمنظور بررسی قدرت گیاهپالایی سورگوم شیرین، این گیاه با پساب شهری آبیاری شد. ابتدا پساب آنالیز شد. با اضافه نمودن ترکیبات کادمیم، سرب و آرسنیک به پساب، سه تیمار 1/0، 1 و 10 میلیگرم در لیتر از فلزات مذکور در پساب شهری ایجاد شد و بهمدت 12 هفته گلدانهای مربوطه با تکرار مناسب آبیاری شد. نمونههای ریشه، ساقه، برگ، بذر، خاک و زهاب گلدانها بهصورت جداگانه برای آنالیز هضم اسیدی و تزریق به دستگاه جذب اتمی برداشت شد و نتایج توسط روشهای آماری مقایسه شد. نتایج نشان داد که میزان انباشت کادمیم و سرب در گیاه سورگوم نسبت به آرسنیک بسیار بیشتر است و به بیش از ده برابر میرسد. از طرف دیگر ضریب جذب یا توانایی گیاه در جذب عناصر در مورد کادمیم و سرب با افزایش غلظت در خاک، به سرعت کاهش یافته و در مورد آرسنیک، ضریب جذب گیاه با افزایش غلظت آن در خاک تا اندازهای افزایش مییابد. در مورد میزان انباشت مواد، توانایی تمامی بافتها در انباشت کادمیم و سرب یکسان بوده و در مورد آرسنیک، بیشترین تجمع این عنصر در ریشه است و در بخشهای هوایی آن مقدار کمتری تجمع مییابد. این پژوهش نشان میدهد الگوی انباشت فلزات سنگین در گیاه سورگوم و همچنین میزان نهایی انباشت، ضریب جذب و تغییرات آن نسبت به غلظت محیط در عناصر مختلف متفاوت است و با توجه به غلظت نهایی انباشت و ضریب جذب، گیاه سورگوم شیرین گونهای مناسب برای پالایش کادمیم و سرب در پسابهای شهری در غلظتهای پایین است و این امر میتواند از انباشت تدریجی آلایندههای مذکور در خاک جلوگیری نماید.</strong>https://www.wwjournal.ir/article_80001_6d9586b9273508edda192a65b01fcff9.pdfمهندسین مشاور طرح و تحقیقات آب و فاضلاب اصفهانمجله آب و فاضلاب1024-593630120190321Investigating Effective Strategies on Drinking Water Demand Management in Birjand Cityبررسی راهبردهای مؤثر بر مدیریت تقاضای آب شرب شهر بیرجند1301357959810.22093/wwj.2018.78299.2352FAعلی شهیدیدانشیار، گروه مهندسی آب، دانشکده کشاورزی، دانشگاه بیرجند، بیرجند، ایران0000-0003-0716-2144عباس خاشعی سیوکیدانشیار، گروه مهندسی آب، دانشکده کشاورزی، دانشگاه بیرجند، بیرجند، ایران0000-0002-2863-8482زهرا زراعتکاردانشجوی دکترای منابع آب، گروه مهندسی آب، دانشکده کشاورزی، دانشگاه بیرجند، بیرجند، ایرانJournal Article20170403Water is considered a passive defense means. One of the strategies of enemy invasion, especially in the border areas of the country (such as South Khorasan) is to dominate the minimal water resources in the region. Also, the growth in demand and the constant volume of renewable fresh water resources has led to water scarcity which in turn has provided the grounds for the development of science and economics theories on the issue of scarce resources allocation. The purpose of this study was to investigate effective factors on drinking water consumption pattern for scarce resources using experts' opinions and employing Analytical Hierarchy and Topsis Analysis (TOPSIS) techniques. The results showed that the strategies of applying tariffs in accordance with the conditions and costs of producing and distributing, preparing and applying water efficiency labels on all equipment and household appliances, using educational catalogs and advertising warnings to reduce water consumption, installing equipment for water use in schools and educational centers and some mosques, and comprehensive water resources (which we lack in Iran) are the best strategies among drinking water consumption patterns in arid regions. The results of this study indicated that the combination of the Hierarchical Analysis Process model and the Ideal Likelihood Option (TOPSIS) can be used to examine and prioritize the patterns of drinking water consumption.<strong>آب بهعنوان یک پدافند غیرعامل مهم محسوب میشود، بهطوری که یکی از راهکارهای تهاجم دشمن بهویژه در مناطق مرزی کشور (مانند خراسان جنوبی) تسلط بر منابع آبی حداقلی منطقه است. همچنین رشد تقاضا و حجم ثابت منابع آب شیرین تجدیدپذیر منجر به کمیابی آن شده و زمینه را برای توسعه نظریههای علم و اقتصاد با موضوع تخصیص منابع کمیاب فراهم شده است. هدف از پژوهش حاضر، بررسی عوامل مؤثر بر الگوی مصرف آب شرب برای منابع کمیاب با استفاده از نظرات کارشناسان با بهرهگیری از روشهای تحلیل سلسله مراتبی و </strong><strong>TOPSIS</strong><strong> است. نتایج نشان داد که راهبردهای اعمال تعرفههای متناسب با شرایط و هزینههای تولید و توزیع، تهیه و بهکارگیری برچسب بهرهوری آب بر روی کلیه تجهیزات و لوازم خانگی، استفاده از کاتالوگهای آموزشی و هشدارهای تبلیغاتی جهت کاهش مصرف آب، نصب وسایل و تجهیزات مصرف آب در مدارس و مراکز آموزشی و بعضی از مساجد و نگرش جامع منابع آب در ایران، بهترین راهبرد در میان راهبردهای الگوی مصرف آب شرب مناطق خشک است. نتایج این پژوهش نشان میدهد که ترکیب مدل فرایند تحلیل سلسله مراتبی و شباهت به گزینه ایدهآل(</strong><strong>TOPSIS</strong><strong>) میتواند در بررسی و اولویتبندی راهبردهای الگوی مصرف آب شرب مورد استفاده قرار گیرد.</strong>https://www.wwjournal.ir/article_79598_ef5f2dc1271b3c29c35b078e019d3355.pdf