@article { author = {Moeinzadeh, Reza and Emadzadeh, Daryoush and Ghadami Jadval Ghadam, Abotaleb}, title = {Petroleum Effluent Treatment Using Ultrafiltration Nanocomposite Membrane Made of Polysulfone and Cellulose Nanocrystal}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {31}, number = {3}, pages = {138-146}, year = {2020}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {10.22093/wwj.2019.167556.2809}, abstract = {Petroleum effluent treatment uses ultrafiltration nanocomposite membrane made of polysulfone and cellulose nanocrystal. In this study, nanocomposite membranes were synthesized by adding different amounts of cellulose nanocrystals (CNCs) to polysulfone membrane (PSF) in order to enhance the membrane's anti-fouling properties against the accumulation of oil particles and then synthesize the membrane properties by spectral analysis. Scanning electron microscopy (SEM), infrared spectroscopy FTIR and contact angle test (CA) were applied to investigate membrane morphology. The results showed that the porosity and hydrophilicity of PSF/NC composite membrane were significantly improved. Experiments related to the performance of the petroleum effluent ultrafiltration system have shown that nanocomposite membranes with 1% cellulose nanocrystals (CNCs) increase the water flux by 60%, excreting about 100% of the petroleum compounds, and optimally recovering the water flow to 94.4%. The findings suggest that the newly developed nanocomposite membrane is an optimal choice for treatment of low concentrated oily wastewater.}, keywords = {Cellulose Nanocrystal,polysulfone,Nanocomposite Membranes,Water flux}, title_fa = {تصفیه پساب‌های نفتی با استفاده از غشای نانوکامپوزیت اولترافیلتراسیون ساخته‌شده از پلی‌سولفون و نانوبلورهای سلولزی}, abstract_fa = {به‌دلیل افزایش انتشار پساب‌های نفتی و همچنین آلودگی‌های محیط‌ زیستی نفت خام، جداسازی نفت و آب یک موضوع محیط زیستی جهانی محسوب می‌شود. در این پژوهش، غشاهای نانوکامپوزیت با اضافه نمودن مقدار مختلف از نانوبلورهای سلولزی (CNC) به غشای پلی‌سولفون (PSF) با هدف افزایش خاصیت ضدرسوبی غشا در مقابل تجمع ذرات نفت، سنتز شدند و سپس مشخصات غشای سنتز شده توسط آنالیزهای میکروسکوپ الکترونی روبشی (SEM)، طیف‌سنجی مادون قرمز (FTIR) و تست زاویه تماس (CA) بررسی شد. نتایج به‌دست‌ آمده از این پژوهش نشان داد که تخلخل و آب‌دوستی غشای ترکیبی PSF/NC به‌طور چشمگیری بهبود یافت. نتایج آزمایش‌های مرتبط با عملکرد سیستم اولترافیلتراسیون پساب‌های نفتی نشان دادند که غشای نانوکامپوزیت با 1 درصد CNC موجب افزایش 60 درصدی شار آب، دفع حدود 100 درصد ترکیبات نفتی و بازیابی مطلوب جریان آبی تا 4/94 درصد می‌شود. این یافته‌ها نشان داد که غشای نانوکامپوزیت ساخته‌شده، یک انتخاب مناسب برای تصفیه فاضلاب نفتی با غلظت کم نفت است.}, keywords_fa = {نانوبلورهای سلولزی,پلی سولفون,غشاهای نانوکامپوزیت,شار آب}, url = {https://www.wwjournal.ir/article_97389.html}, eprint = {https://www.wwjournal.ir/article_97389_d1e617446a2b84007538fbcb09aad88b.pdf} }