@article { author = {Sadeghi, Mohammad and Emadzadeh, Dariush}, title = {Investigation of the Effect of Anionic and Cationic Surfactants on the Performance of Polyamide Membrane Nanofiltration}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {30}, number = {4}, pages = {122-129}, year = {2019}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {10.22093/wwj.2018.113868.2589}, abstract = {Over the past decades, the sharp increase in population growth and industrialization in developing countries has reduced the quality and quantity of water resources. Water Treatment and purification technologies are rapidly developing in membrane separation processes. In this study, the effect of anionic and cationic surfactants on the performance of polyamide membrane nanofiltration was investigated experimentally. Nanofiltration membranes were constructed by adding anionic surfactant Sodium Dodecyl Sulfate and Hexadecyltrimethyl ammonium bromide cationic with a filming machine. The highest percentage of salt excretion related to the polyamide nanofiltration membrane without adding surfactant with the amount of 16.19% at 180 minutes. Also, the greatest amount of water flowing from the polyamide nanofiltration membrane is related to the time of 30 minutes and the state where the anionic surfactant is added to the membrane by weight of 10%. In this case, the amount of water flowing through the membrane of polyamide nanofiltration was 37.76 L/m2. When anionic surfactant was added to the membrane at a rate of 10%, the membrane water flux was 41.48% higher than the pure membrane (no additive).}, keywords = {Surfactant,Cationic,Anionic,Membrane,Polyamide,Nanofiltration}, title_fa = {بررسی اثر مواد سورفکتانت‌های آنیونی و کاتیونی بر عملکرد غشاء پلی‌آمیدی نانوفیلتراسیون}, abstract_fa = {رشد جمعیت و صنعتی شدن کشورهای در حال توسعه باعث کاهش کیفیت و کمیّت منابع آب شده است. تکنولوژی‌های تصفیه و خالص‌سازی آب معدنی در فرایندهای جداسازی غشایی به سرعت در حال پیشرفت هستند. در این پژوهش اثر مواد فعال سطحی آنیونی و کاتیونی بر عملکرد غشاء پلی‌آمیدی نانوفیلتراسیون به‌طور آزمایشگاهی مورد بررسی قرار گرفت. غشاهای نانوفیلتراسیون با افزودن مواد فعال سطحی آنیونی سدیم دودسیل سولفات (SDS) و مواد فعال سطحی کاتیونی هگزا دسیل تری متیل آمونیوم برماید (CTAB) و کاتیونی هگزا دسیل تری متیل آمونیوم بروماید ساخته شد و سپس آنالیزهای میکروسکوپ الکترونی روبشی و طیف‌سنجی تبدیل فوریه انجام شد. بیشترین درصد دفع نمک مربوط به غشاء نانوفیلتراسیون پلی‌آمید بدون افزودن مواد فعال سطحی با مقدار 16/91 درصد در زمان 180 دقیقه به‌دست آمد. همچنین بیشترین مقدار شار آب عبوری از غشاء نانوفیلتراسیون پلی آمید مربوط به زمان 30 دقیقه و حالتی که 10/0 درصد وزنی مواد فعال سطحی آنیونی به غشاء افزوده می‌شود که در این حالت مقدار شار آب عبوری از غشاء نانوفیلتراسیون پلی آمید L/m2.hr 76/37 حاصل شد. در حالتی که 10/0 درصد وزنی مواد فعال سطحی آنیونی به غشاء افزوده شد، شار آب عبوری از غشاء 80/41 درصد نسبت به غشا خالص بدون افزودنی، افزایش پیدا کرد.}, keywords_fa = {مواد فعال سطحی,سورفکتانت کاتیونی,سورفکتانت آنیونی,غشا,پلی‌آمید,نانوفیلتراسیون}, url = {https://www.wwjournal.ir/article_87884.html}, eprint = {https://www.wwjournal.ir/article_87884_94ecb2b46057450fa6ddf899003a3b80.pdf} }