@article { author = {Fahraji-Azad, Hassan and Ghaeini-Hessaroeyeh, Mahnaz and Fadaei-Kermani, Ehsan}, title = {The Detection of Air Valves Location and Size in Long Water Pipelines}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {32}, number = {2}, pages = {28-41}, year = {2021}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {10.22093/wwj.2020.218909.2987}, abstract = {Condensed air in the water stream causes serious problems such as head drop, localized pressure increases high noise generation, shaking in the pipes, as well as the loss of pumps in the system will be transmitted. To remove air from the system, air valves should be used. In this research, the hydraulic properties of air flow contained in the water pipes is studied, then a program is developed for providing the optimal solution regarding the size and position of the valves in the right place by using MATLAB software. The general method is to examine all the tube parts at the failure location by the direct search algorithm and find the lowest gradient and calculate the initial discharge rate of the line as following: First, the minimum amount of air intake in the water pipeline will occur. Second, the air outlet speed of the system will be optimal. To enhance the applicability of the proposed method, the model was developed in the GUI environment. Finally, for the verification and evaluation of the results, an identical model of water pipeline using Valmatic software and the present developed software has been analyzed.}, keywords = {Air Valve,Water Transmission Pipeline,MATLAB software,GUI Environment,Valmatic Software}, title_fa = {مکان‌یابی و تعیین اندازه شیرآلات هوا در خطوط لوله انتقال آب طویل}, abstract_fa = {هوای محبوس شده در لوله‌های انتقال آب باعث بروز مشکلاتی جدی از قبیل افت هد، افزایش فشار موضعی، تولید صدای زیاد، لرزش در لوله‌ها و همچنین استهلاک پمپ‌ها می‌شود. معمولاً برای خروج هوا از سیستم باید از شیرهای هوا استفاده کرد. در این پژوهش راهکاری بهینه در خصوص تعیین اندازه و مکان مناسب قرارگیری شیرهای هوا در خطوط انتقال از طریق برنامه‌ای توسعه داده شده در نرم‌افزار MATLAB، ارائه می‌شود. در این روش آب‌‌اندازی اولیه خط به‌گونه‌ای محاسبه ‌شد که اولاً کمترین مقدار محبوس‌شدگی هوا در خط لوله آب رخ دهد و ثانیاً سرعت خروج هوا از سیستم بهینه باشد. روش ارائه شده برای قسمتی از خط لوله پروژه انتقال آب به شهرهای شمالی استان کرمان پیاده‌سازی شد. برای افزایش قابلیت کاربردی روش ارائه شده، برنامه پیشنهادی در محیط GUI توسعه داده شده که این امکان فراهم می‌شود که اندازه و مکان بهینه شیرهای هوا به‌صورت گرافیکی نمایش داده شود و نتایج به‌دست آمده ارائه شد. در نهایت برای صحت‌سنجی نتایج حاصل، از نرم‌افزارValmatic که نرم‌افزاری مطرح در طراحی خطوط انتقال است استفاده شد. نتایج نشان داد که روش ارائه شده دارای دقت و قابلیت مطلوبی در زمینه محاسبات و طراحی شیرآلات هوا است.  }, keywords_fa = {شیر هوا,خطوط انتقال آب,نرم‌افزار MATLAB,GUI,نرم‌افزارValmatic}, url = {https://www.wwjournal.ir/article_129752.html}, eprint = {https://www.wwjournal.ir/article_129752_645c97aa377888967f803551178266ad.pdf} }