@article { author = {Kabiri-Samani, Abdorreza and Esmaili, Hojat and Heidarpour, Manochehr}, title = {Improving Performance of Side Weirs Using Groups of Vane Plates or Piles}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {22}, number = {1}, pages = {101-113}, year = {2011}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {Weirs are among the most common hydraulic structures that have been used for centuries by hydraulic engineers for flow measurement, energy dissipation, flow diversion, regulation of flow depth, and flood passage. Side weirs, or lateral weirs, are essentially free overflow weirs installed along the side of the main channel to divert flow over them when the surface of flow in the channel rises above their crest. These weirs are often used in irrigation and flood regulation systems, urban drainage, and many other water resources and environmental projects. The flow over side weirs falls under the category of spatially varied flow. In this paper, methods are presented based on analytical and experimental models for improving side weir performance. For this purpose, groups of (one, two, and three) vane plates or piles were employed. Analytical models were developed based on momentum and continuity equations for determination of dynamic force on vane plates or piles, water surface profile and discharge coefficient of side weir. Measured data were used for calibrating the analytical models and for presenting expressions for the discharge coefficient. Results show that the diverted discharge coefficient can be increased by up to 30% compared to the simple side weir discharge coefficient.    }, keywords = {Side Weir,Analytical model,Experimental Model,Vane Plates,Groups of Piles}, title_fa = {افزایش راندمان سرریزهای جانبی ساده با استفاده از صفحات هادی یا گروه شمع}, abstract_fa = {سرریزها از کاربردی‌ترین سازه‌های هیدرولیکی هستند که برای مقاصد مختلف مانند اندازه‌گیری دبی، استهلاک انرژی، انحراف جریان، تنظیم سطح آب و کنترل سیلاب توسط مهندسان هیدرولیک مورد استفاده قرار گرفته‌اند. در سرریزهای جانبی، آستانه کنترل در کنار و به موازات کانال اصلی قرار می‌گیرد و به مجرد بالا آمدن سطح آب تا رقوم بیشتر از آستانه سرریز، انحراف آب به کانال جانبی صورت می‌پذیرد. این نوع سرریزها معمولاً در سیستم‌های زهکشی و کنترل سیلاب، جمع‌آوری آبهای سطحی و بسیاری از پروژه‌های منابع آب و محیط زیست کاربرد دارند. محاسبات سرریزهای جانبی بر اساس جریان متغیر مکانی انجام می‌شود. در این مقاله به بررسی و مطالعه روشهایی برای افزایش راندمان سرریزهای جانبی پرداخته شد. به این منظور استفاده از گروه صفحات هادی یا گروه شمع در حالتهای تک، دوگانه و سه‌گانه پیشنهاد شد. در ابتدا بر اساس معادلات حاکم (قوانین بقای اندازه حرکت و پیوستگی) و اعمال فرضیات مناسب، معادلاتی برای تعیین نیروی دینامیکی وارد بر این سازه‌ها در کانال، تعیین پروفیل سطح آب و نیز تعیین ضریب دبی جریان عبوری از سرریز جانبی در حضور سازه‌های مورد بحث ارائه شد و سپس با استفاده از نتایج مدل آزمایشگاهی و اندازه‌گیری‌های انجام شده به واسنجی نتایج تحلیلی و ارائه روابطی برای تعیین ضریب دبی جریان پرداخته ‌شد. بررسی نتایج تحلیلی و آزمایشگاهی نشان داد که در صورت استفاده از صفحات هادی و گروه شمع می‌توان ضریب دبی جریان را تا حدود 30 درصد افزایش داد.    }, keywords_fa = {سرریز جانبی,مدل تحلیلی,مدل آزمایشگاهی,صفحات هادی,گروه شمع}, url = {https://www.wwjournal.ir/article_1151.html}, eprint = {https://www.wwjournal.ir/article_1151_14cc0e85c75af63c6c55d3e024643cda.pdf} }