@article { author = {Mehdizadeh Mahalli, Seyed Sadjad and Salehi Neyshabouri, Seyed Ali Akbar}, title = {Experimental Investigation of Saltation Characteristics of Particles near Channel Bed}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {22}, number = {1}, pages = {92-100}, year = {2011}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {This paper studies the mechanical characteristics of saltation of bed-load particles in turbulent flows. Experiments have been carried out by means of high speed photography to obtain saltation characteristics such as length, height, velocity, impacting and rebounding angles for different hydraulic conditions, particle size, density and bed roughness by analyzing and processing pictures taken at 250 frames per second. The measured values of the parameters showed that increases in turbulence parameters of the flow increase saltation length, height, and velocity but decrease the impacting and rebounding angles. It was also found that saltation length and height tended to increase as the average size of the bed material (d50) increased. To solve numerical trajectory equations, the initial velocity component of the particle must be known. The initial longitudinal particle velocity was found to range from 3u* to 8u* and its vertical velocity ranged from 1.5u* to 3.5u*, which were different from the values reported in the literature. The longitudinal and vertical components of the restitution coefficient were also measured and it was seen that the Shields parameter (t*) had no meaningful effect on these components, remaining almost constant with increasing.}, keywords = {Turbulent Flow,Saltation,Shear Stress,Bed Roughness,Bed load}, title_fa = {بررسی آزمایشگاهی مشخصات جهشی ذرات در نزدیکی بستر کانال}, abstract_fa = {در این تحقیق، خصوصیات جهش تک ذره رسوبی در یک جریان آشفته با استفاده از سیستم تصویربرداری با سرعت بالا، اندازه‌گیری شد. این خصوصیات شامل طول، ارتفاع، سرعت، زوایای برخورد به بستر و بلندشدگی بودند که با تغییر در شرایط هیدرولیکی جریان، قطر، چگالی ذره و همچنین زبری بستر، با سرعت 250 فریم بر ثانیه به‌دست ‌آمدند. نتایج این تحقیق نشان ‌داد که با افزایش آشفتگی جریان، طول، ارتفاع و سرعت ذره افزایش یافته و زوایای برخورد به بستر و بلندشدگی مجدد آن کاهش می‌یابد. نتایج آزمایش‌ها همچنین حاکی از این امر است که با افزایش قطر متوسط ذرات بستر، تمامی خصوصیات جهش تمایل به افزایش دارند. برای حل عددی معادلات حاکم بر ذره و به‌دست آوردن مسیر حرکت آن در یک گام جهش، سرعتهای اولیه جهش در هر دو جهت افقی و قائم به‌دست آمد که از آنها می‌توان به‌عنوان شرایط اولیه در حل عددی استفاده نمود. مؤلفه افقی سرعت ذره رسوبی در دامنه 3 تا 8 برابر سرعت برشی و مؤلفه قائم آن در دامنه 1/5 تا 3/5 برابر سرعت برشی قرار داشت. در ادامه با محاسبه مؤلفه‌های ضریب ارتجاعی ذره رسوبی نشان داده شد که تغییر در شدت جریان، تأثیر اندکی بر روی این مؤلفه‌ها داشته به‌طوری‌که با افزایش آن، این دو مشخصه تقریباً ثابت ماندند.      }, keywords_fa = {جریان آشفته,جهش تک ذره,تنش بستر,زبری کانال,بار بستر}, url = {https://www.wwjournal.ir/article_1150.html}, eprint = {https://www.wwjournal.ir/article_1150_2d31bca309cd2cbe6a1c1c81825ab263.pdf} }