1- Kreetachat, T., Damrongsri, M., Punsuwon, V., Vaithanomsat, P., Chiemchaisri, C., and Chomsurin, C. (2006). “Effects of ozonation process on lignin-derived compounds in pulp and paper Mill Effluents.” J. Biochemica Engineering, 35, 365-370.
2- Adhoum, N., and Monser, L. (2004). “Decolourization and removal of phenolic compounds from olive mill wastewater by electrocoaqulation.” J. Chemical Engineering Process, 43, 1281-1287.
3- Tantemsapya, N., Wirojanagud, W., and Sakolchai, S. (2004). “Removal of color, COD and lignin of pulp and paper wastewater using wood ash.” J. Science Technology, 26, 1-12.
4- Dafinov, A., Font, J., and Garcia-Valls, R. (2005). “Processing of black liquors by UF/NF ceramic membranes.” J. Desalination, 173, 83-90.
5- Ghatak, H.R., Kumar, S., and Kundu, P.P. (2002). “Electrode processes in black liquor electrolysis and their significance for hydrogen production.” J. Chemical Technology, 33, 2904-2911.
6- Guolin, H., Jeffrey, X. Sh., and Langrish, T.A.G. (2007). “A new pulping process for wheat straw to reduce problems with the discharge of black liquor.” J. Bio Resource Technology, 98, 2829-2835.
7- Srivastava, V.C., Mall, D.I., and Mishra, M.I. (2005). “Treatment of pulp and paper mill wastewaters with polyaluminium chloride and bagasse fly Ash.” J. Colloids and Surfaces, 260, 17-28.
8- Soloman, P.A., Ahmed Basha, C., Velan, M., Balasubr Amanian, N., and Marimuthu, P. (2009). “Augmentation of biodegradability of pulp and paper industry wastewater by electrochemical pre-treatment and optimization by RSM.” J. Separation and Purification Technology, 69, 109-117.
9- Qinglin, Z., and Chuang, K.T. (2001). “Adsorption of organic pollutants from effluents of a kraft pulp mill on activated carbon and polymer resin.” Advances in Environmental Research, 3, 251-258.
10- Fuying, M., Zeheng, X., Yubin, Z., Xiaochen, Y., and Xiaoyu, Z. (2008). “Repeated batch process for biological treatment of black liquorusing brown-rot basidiomycete fomitopsis sp. IMER2.” Microbiol Biotechnol., 24, 2627-2632.
11- Ghoreishi, S.M., and Haghighi, M.R. (2007). “Chromophores removal in pulp and paper mill effluent via hydrogenation-biological batch reactors.” J. Chemical Engineering, 127, 59-70.
12- Kalyani, P.K.S., Balasubramanian, N., and Srinivasakannan, C. (2003). “Decolorization and COD reduction of paper industrial effluent using electro-coagulation.” J. Chemical Engineering, 151, 97-104.
13- Zaied, M., and Bellakhal, N. (2008). “Electrocoagulation treatment of black liquor from paper industry.” J. Hazardous Material, 163, 995-1000.
14- Mollah, M.Y.A., Pathak, S.R., Patil, P.K., Vayuvegula, M., Agrawal, T.S., Gomes J.A.G., Kesmez, M., and Cocke, D.L. (2004). “Treatment of orange II azo-dye by electrocoagulation (EC) technique in continuous flow cell using sacrificialiron electrodes.” J. Hazardous Material, 109, 165-171.
15- Chen, G.H. (2004). “Electrochemical technologies in wastewater treatment.” J. Separation and Purification Technology, 38, 11-41.
16- Kuramitz, H., Nakata, Y., Kawasaki, M., and Tanaka, S. (2009). “Electrochemical oxidation of bisphenol A. application to the removal of bisphenol a using a carbon fiber electrode.” J. Chemosphere, 45, 37-43.
17- Chen, J.S., and Do, M.L. (1994). “Decolorization of dye-containing solutions by electrocoagulation.” J. Application Electrochemical, 24, 785-790.
18- Feng, C., Sugiura, N., and Shimada, S. (2003). “Development of a high performance electrochemical wastewater treatment system.” J. of Hazardous Materials, 103, 65-78.
19- Hector, A., Moreno-Casillas, D., Cocke, A., Jewel, A.G., Gomes, P., Morkovsky, B. J.R., Parga C., and Eric, P. (2007). “Electrocoagulation mechanism for COD removal.” J. Separation and Purification Technology, 56, 204-211.
20- Rahmani, A.R., and Samarghandi, M.R. (2008). “Electrocoagulation treatment of color solution containing colored index eriochrome black T.” J. Water and Wastewater, 64, 9-15. (In Persian)
21- Hemat Abadi, H. (2010). “Pollution control of a paper recycling mill effluent by electrochemical technique.” M.Sc. Thesis, Tarbiat Modares University, Tehran. (In Persian)
22- Ugurlu, M., Gurses, A., Dogar, C., and Yalcın, M. (2007). “The removal of lignin and phenol from paper mill effluents by electrocoagulation.” J. Environmental Management, 87, 420-428.
23- Mahesh, S., Prasad, B., Mall, I. D., and Mishra, I.M. (2006). Electrochemical degradation of pulp and paper mill wastewater. Part1. COD and color removal.” J. Industrial and Engineering Chemistry, 45, 2830-2839.
24- Donini, J.L., Kan, J.A., and Kar, K.L. (1997). “The operating cost of electrocoagulation.” Chemical Engineering, 2, 1000-1007.
25- APHA (1997). Standard methods for examination of water and wastewater, 18th Ed., Amrican Public Health Assocation, Washington D.C.
26- Zhu, J., Zhao, H., and Ni, J. (2007). “Fluoride distribution in electrocoagulation defluoridation process.” J. Separation and Purification Technology, 56, 184-191.
27- Rajeshwar, K., and Ibanez, J. (1997). Environmental electrochemistry, Academic Press, Australia.
28- Abdelwahaba, O., Aminb, N.K., and El-Ashtoukhyb, E-S.Z. (2009). “Electrochemical removal of phenol from oil refinery wastewater, J. Hazardous Material, 163, 711-716.
29- Jafarzadeh, N., and Daneshvar, N. (2006). “Treatment of textile wastewater containing basic dyes by electrocoagulation process.” J. Water and Wastewater, 57, 22-29. (In Persian)
30- Kobya, M., Can, O. T., and Bayramoglu, M. (2003). “Treatment of textile wastewaters by electrocoagulation using iron and aluminium electrodes.” J. Hazardous Material, 100, 163-178.
31-Holt, P.H., Barton, G.W., Wark, M., and Mitchell, A.A. (2002). “A quantitative comparison between chemical dosing and electrocoagulation.” J. Colloids Surface, A: Physical Chemical Engineering, 211, 233-248.
32- Gurses, A., Yalc, M., and Dogar, C. (2002). “Electrocoagulation of some reactive dyes: A statistical investigation of some electrochemical variables.” J. Waste Management, 22 (5), 491-499.
33- Othman, F., Sohaili, J., Niam, M.F., and Fauzia, Z. (2006). “Enhancing suspended solid removal from wastewater using Fe electrodes.” Malaysian Journal of Civil Engineering, 18, 139-148.