@article { author = {Taheri, Hamid and Hasani, AliAkbar and Ganjidoust, Hossein}, title = {Simulation of Water Level and Temperature in the Sepidrood Reservoir}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {25}, number = {2}, pages = {129-134}, year = {2014}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {In this study, the water level and temperature in the Sepidrood reservoir were simulated using CE-QUAL-W2 software. The utilized data for the calibration of water level and temperature models were the in-situ data from 1/6/2005 to 9/4/2006. Sensitivity analysis was used for determination of the influenced parameters on the water level and temperature in the Sepidrood reservoir. The results showed that wind sheltering coefficient, shading coefficient and empirical coefficients in the wind speed function are the most important parameters, hence these parameters were calibrated in the calibration step. In the validation step, the data from 9/4/2006 to 8/10/2006 were utilized. The results of model validation showed that CE-QUAL-W2 can simulate the water level and temperature with 0.3 and 3.6 % error, respectively. The results imply that the model has appropriate performance for water level and temperature simulation. The results demonstrated that Sepidrood reservoir is a completely mixed reservoir. The influences of different parameters on the reservoir stratification were investigated. The results demonstrated that the high wind speed and low retention time are the main factors on complete mixing of Sepidrood reservoir. In addition, the air temperature and the position of reservoir withdraw have no significant effects on the reservoir stratification.}, keywords = {Sepidrood Reservoir,Thermal stratification,Water Level Simulation,Temperature Simulation,CE-QUAL-W2}, title_fa = {شبیه‌سازی تراز سطح آب و دمای مخزن سد سپیدرود}, abstract_fa = {در این تحقیق تراز سطح آب و دمای آب در لایه‌های مختلف مخزن سد سپیدرود توسط نرم افزارCE-QUAL-W2 شبیه‌سازی ‌شد. داده‌های استفاده شده در مرحله کالیبراسیون، دما و تراز سطح آب مخزن سد مربوط به 11/3/84 تا20/1/85 بود. با انجام آنالیز حساسیت، پارامترهای مؤثر شناسایی شد و در مرحله کالیبراسیون مدل، این پارامترها که شامل ضریب ممانعت باد، ضریب سایه و ضرایب تجربی تابع سرعت باد بودند، کالیبره شدند. در دوره صحت‌سنجی از داده‌های دما و تراز سطح آب مربوط به 20/1/85 تا 16/7/85 استفاده شد. نتایج صحت سنجی نشان داد که CE-QUAL-W2 می‌تواند به‌ترتیب با درصد خطای 3/0 و 6/3، تراز سطح آب و دمای مخزن را شبیه‌سازی کند که حاکی از انجام مدل‌سازی مناسب می‌باشد. نتایج مدل‌سازی بیانگر عدم وجود لایه‌بندی حرارتی در مخزن سد سپیدرود بود. بررسی عوامل مؤثر بر دمای آب نشان داد عواملی که باعث عدم وجود لایه‌بندی حرارتی در مخزن سد سپیدرود می‌شوند، شامل سرعت بسیار بالای باد و زمان ماند کوتاه مخزن سد است. همچنین بررسی‌ها نشان داد که دمای هوا و محل برداشت آب از سد، بر روی لایه‌بندی حرارتی سد سپیدرود تأثیر چندانی ندارند.}, keywords_fa = {مخزن سد سپیدرود,لایه‌بندی حرارتی,شبیه‌سازی دما,شبیه‌سازی تراز سطح آب,CE-QUAL-W2}, url = {https://www.wwjournal.ir/article_4763.html}, eprint = {https://www.wwjournal.ir/article_4763_b94ae9a866e59793257d21e59cbfb4dd.pdf} }