@article { author = {mohammad rezapour tabari, mahmoud and Eilbeigi, Mehdi}, title = {Auto-Calibration of Aquifer Parameters Using Aquifer Distributed Mathematical Models and Direct Searching Algorithm}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {25}, number = {3}, pages = {98-109}, year = {2014}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {Simulation of behavior of aquifers into determining groundwater exploitation rate and planning for sustainable use of groundwater is very important. In this regard, groundwater models using hydraulic, hydrological and hydro-geological parameters were developed to predict the quality and quantity of aquifer parameters. Good knowledge of these parameters can be increase the accuracy of aquifer simulation. For this purpose, a structure based on advance optimization methods for calibration of parameters with low accuracy (coefficient of hydrodynamic, aquifer recharge and withdrawal rates) were developed. In the proposed model, minimizing the sum of the square differences between simulated and observed groundwater level was considered as the objective function. Allowable range of calibration parameters has been considered as constraints. The governing flow equations of the aquifer used to determine the groundwater level in each cells. These equations were solved by the finite difference method. by runing the proposed model, the optimal values of parameters were determined in each cell. The comparison between simulated and observed groundwater level shows the capability of the proposed approach in accuratey estimation of the aquifer parameters.}, keywords = {mathematical model,Auto-Calibration,aquifer,optimization,Distributed model,Model Parameters}, title_fa = {کالیبراسیون خودکار پارامترهای آبخوان با استفاده از مدل ریاضی گسترده آبخوان و الگوریتم مبتنی بر جستجوی مستقیم}, abstract_fa = {شبیه‌سازی رفتار آبخوان به‌منظور تعیین میزان بهره‌برداری و برنامه‌ریزی برای استفاده پایدار از این منابع بسیار مهم است. در این خصوص مدل‌های آب زیرزمینی با استفاده از پارامترهای هیدرولیکی، هیدرولوژیکی و هیدروژئولوژیکی اقدام به پیش‌بینی کمّی و کیفی پارامترهای آبخوان می‌نمایند. از آنجا که شناخت صحیح این پارامترها می‌تواند منجر به افزایش دقت شبیه‌سازی آبخوان گردد، لذا تخمین مقادیر متناسب با پارامترهای ورودی مدل از اهمیت بالایی برای برنامه‌ریزی در شرایط واقعی برخوردار است. لذا در این مطالعه مدلی بر پایه روشهای پیشرفته بهینه‌یابی به‌منظور کالیبره نمودن پارامترهایی با دقت پایین (ضرایب هیدرودینامیکی، مقادیر برداشت و تغذیه آبخوان) تدوین گردید. در مدل پیشنهادی، حداقل نمودن مجموع میزان اختلافات بین مقادیر شبیه‌سازی و مشاهداتی تراز سطح آب زیرزمینی در طول دوره شبیه‌سازی به‌عنوان تابع هدف در نظر گرفته شد. بازه مجاز تغییرات پارامترهای مورد کالیبراسیون به‌عنوان محدودیتهای مسئله لحاظ گردید. برای تعیین مقدار تراز در هر سلول، از روابط حاکم بر محیط‌های متخلخل استفاده شد که بر اساس روش اختلاف محدود این روابط حل شدند. با اجرای مدل پیشنهادی مقدار بهینه پارامترها در هر سلول تعیین گردید. بررسی مقادیر تراز شبیه‌سازی شده با مقادیر مشاهداتی نشان‌دهنده دقت بالای رویکرد ارائه شده در تخمین صحیح پارامترهای آبخوان است.}, keywords_fa = {مدل‌سازی ریاضی,کالیبراسیون خودکار,آبخوان,بهینه‌سازی,مدل گسترده,پارامترهای مدل}, url = {https://www.wwjournal.ir/article_4585.html}, eprint = {https://www.wwjournal.ir/article_4585_ef28bceb068cfacf18c282bf7b9b5fdf.pdf} }