@article { author = {Mokhtari- shorijeh, Zahra and Rafizadeh, mehdi and Mohammadi, Mehrnoosh}, title = {Preparation of Diethylenetriamine Modified Polyacrylonitrile Nanofibers for Cadmium Ion Adsorption}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {27}, number = {3}, pages = {12-19}, year = {2016}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {In this study, the electrospinning method was used to manufacture polyacrylonitrile (PAN) nanofibers. The procedure involved spinning a solution of 10%wt PAN in dimethyl formamide (DMF) in an electric field of 21 kV and with a tip to collector distance of 16 cm. The nanofibers thus obtained had an average diameter of 100 nm. Then, scanning electron microscopy (SEM) images were used to investigate the morphology of the nanofibers. In the next step, the nanofiner surface was modified with diethylenetriamine and FTIR was employed to ensure the presence of amines on the nanofiber surface. The functionalized nanofibers were then used for the first time to adsorb ions of cadmium (a heavy metal with industrial applications) and its adsorption capacity was evaluated. The chemical charactristics of the nanofibers and the effects of such parameters as pH, temprature, and contact time on adsorption efficiency were investigated. The results showed that maximum adsorption efficiency was achieved within the first 10 minutes of the process at a pH in the range of 5‒7 when about 80% of the cadmium ions were adsorbed.. Moreover, only slight changes were observed with longer contact times or with increasing temperature. Finally, the adsorption data fitted well with the Langmuir isotherm}, keywords = {Nanofibers,Polyacrylonitrile,Cadmium,Modified,Adsorption}, title_fa = {تهیه نانوالیاف پلی‌اکریلو‌نیتریل و اصلاح شده سطحی با دی‌اتیلن‌تری‌آمین برای جذب یون کادمیم}, abstract_fa = {در این پژوهش نانوالیاف پلی‌اکریلونیتریل به روش الکتروریسی ‌‌‌‌‌‌‌‌‌‌‌‌‌‌تهیه شد. به‌این منظور محلول پلی‌اکریلو نیتریل و د‌‌‌‌‌‌‌‌‌ی‌متیل فرمامید با غلظت 10 درصد وزنی ‌در میدان الکتریکی 21 کیلوولت و فاصله صفحه 16 سانتی‌متر تحت ریسندگی ‌قرار گرفت و نانوالیاف با قطر متوسط 100 نانومتر تولید شد. الیاف به‌دست آمده دارای قطرهای یکنواخت و متفاوتی بود. مورفولوژی نانو الیاف به‌وسیله SEM بررسی شد. در مرحله بعد سطح نانوالیاف توسط دی‌اتیلن‌تری‌آمین عامل‌دار شد و سپس با استفاده از اسپکتروفتومتر FTIR از وجود گروه‌های آمین در سطح نانوالیاف اطمینان حاصل شد و از این الیاف آمین‌دار شده برای جذب یون کادمیم استفاده شد. در فرایند جذب خصوصیات شیمیایی ‌الیاف و تاثیرات پارامترهایی مانند pH، دما و زمان مورد مطالعه قرار گرفت. بررسی‌ها نشان ‌داد در pH برابر 5 تا 7، بیش از 80 درصد یون‌های کادمیم در مدت 10 دقیقه اول جذب الیاف شد و پس از 10 دقیقه با گذشت زمان بیشتر، تغییر اندکی ‌در افزایش میزان جذب مشاهده شد و با افزایش دما، مقدار جذب اندکی ‌افزایش یافت. بر اساس نتایج به‌دست آمده جذب یون‌های کادمیم از مدل لانگمیر تبعیت می‌کند. در این پژوهش برای اولین بار جذب یون کادمیم توسط نانوالیاف پلی‌اکریلونیتریل آمین‌دار انجام شد.}, keywords_fa = {نانو الیاف,پلی‌اکریلو نیتریل,کادمیم,اصلاح سطح,جذب}, url = {https://www.wwjournal.ir/article_12182.html}, eprint = {https://www.wwjournal.ir/article_12182_d56d867a97489fec66db085e7d55d110.pdf} }