@article { author = {}, title = {.}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {26}, number = {6}, pages = {-}, year = {2016}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {}, keywords = {}, title_fa = {صفحات آغازین}, abstract_fa = {}, keywords_fa = {}, url = {https://www.wwjournal.ir/article_11924.html}, eprint = {https://www.wwjournal.ir/article_11924_9d9a083eb261acda93c80ad94f31a73c.pdf} } @article { author = {}, title = {.}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {26}, number = {6}, pages = {1-4}, year = {2016}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {}, keywords = {}, title_fa = {پیشگفتار}, abstract_fa = {}, keywords_fa = {}, url = {https://www.wwjournal.ir/article_11925.html}, eprint = {https://www.wwjournal.ir/article_11925_a49df602c47f8e34fb3dc2d773677616.pdf} } @article { author = {Rahgozar, Mohamadali and Zare, Mohammad Reza and Hashemi Fesharaki, Seyyed Mohammad}, title = {An Intelligent Network Proposed for Assessing Seismic Vulnerability Index of Sewerage Networks within a GIS Framework (A Case Study of Shahr-e-Kord)}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {26}, number = {6}, pages = {5-15}, year = {2016}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {Due to their vast spread, sewerage networks are exposed to considerable damages during severe earthquakes, which may lead to catastrophic environmental contamination. Multiple repairs in the pipelines, including pipe and joint fractures, could be costly and time-consuming. In seismic risk management, it is of utmost importance to have an intelligent tool for assessing seismic vulnerability index at any given point in time for such important utilities as sewerage networks. This study uses a weight-factor methodology and proposes an online GIS-based intelligent algorithm to evaluate the seismic vulnerability index (VI) for metropolitan sewerage networks. The proposed intelligent tool is capable of updating VI as the sewerage network conditions may change with time and at different locations. The city of Shahr-e-Kord located on the high risk seismic belt is selected for a case study to which the proposed methodology is applied for zoning the vulnerability index in GIS. Results show that the overall seismic vulnerability index for the selected study area ranges from low to medium but that it increases in the southern parts of the city, especially in the old town where brittle pipes have been laid}, keywords = {Seismic Vulnerability Index,Intelligent network,Sewerage Network,Weight-factor Method,geographic information system (GIS),shahr-e-kord}, title_fa = {پیشنهاد شبکه هوشمند ارزیابی شاخص آسیب‌پذیری لرزه‌ای شبکه جمع‌آوری فاضلاب در بستر GIS (مطالعه موردی: شهرکرد)}, abstract_fa = {شبکه جمع‌آوری فاضلاب به موجب پراکندگی و قرارگیری در سطح وسیعی از گستره زمین، در هنگام زلزله در معرض آسیب‌های فراوانی قرار دارد. این آسیب‌دیدگی علاوه بر زیان مستقیم به شبکه، پیامدهایی همچون آلودگی محیط زیست را نیز به‌دنبال دارد. در هنگام زلزله‌های بزرگ، تعمیرات خرابی‌های متعدد در شبکه از جمله شکست لوله‌ها و تخریب اتصالات آنها بسیار پرهزینه و زمان‌بر است. بنابراین از دیدگاه مدیریت ریسک زلزله، وجود ابزاری هوشمند که قادر به ارزیابی آسیب‌پذیری لرزه‌ای برای هر نقطه از شبکه جمع‌آوری فاضلاب به‌عنوان یک شریان‌ حیاتی و در هر لحظه از زمان باشد، بسیار با اهمیت است. در این مقاله با استفاده از "روش وزندهی و ارائه الگوریتمی هوشمند تحت سیستم اطلاعات جغرافیایی GIS که قابلیت به‌روز رسانی اطلاعات ورودی شبکه را بسته به زمان و مکان دارا باشد، به ارزیابی شاخص آسیب‌پذیری لرزه‌ای شبکه‌های عظیم جمع‌آوری فاضلاب شهری پرداخته شد. به‌عنوان یک مطالعه موردی، نقشه‌های پهنه‌بندی شاخص آسیب‌پذیری لرزه‌ای شبکه جمع‌آوری فاضلاب شهرکرد، منطقه‌ای با خطر لرزه‌ای بالا، در بستر GIS ارائه شد. نتایج نشان می‌دهد که شاخص آسیب‌پذیری لرزه‌‌ای خطوط لوله‌ فاضلاب شهرکرد در حد کم و متوسط است و در جنوب شهرکرد به‌خصوص در بافت قدیمی شهر که لوله‌های آن ترد است، از دیگر نقاط بیشتر است.}, keywords_fa = {شاخص آسیب‌پذیری لرزه‌ای,شبکه هوشمند,شبکه جمع‌آوری فاضلاب,روش وزندهی,سیستم اطلاعات جغرافیایی GIS,شهرکرد}, url = {https://www.wwjournal.ir/article_11073.html}, eprint = {https://www.wwjournal.ir/article_11073_79aa828c195924e6888930c77e5d4cbe.pdf} } @article { author = {soleimani, mahsa and Behzadian, Kourosh and ardeshir, abdollah}, title = {Evaluatiopn of Strategies for Modifying Urban Storm Water Drainage System Using Risk-based Criteria}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {26}, number = {6}, pages = {16-29}, year = {2016}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {Appropriate modification of existing urban storm water drainage networks may help reduce network inundation and flood-borne pollution risks. It will, therefore, be necessary to analyze the risks associated with water quantity and quality during urban flooding before any reconstruction strategies can be identified that are adaptable to, or compatible with, urban sustainable development strategies. In this paper, three network modification strategies are evaluated against the three criteria of network inundation at different sections, flood pollution risks, and modification plan costs. The modification strategies evaluated include the conventional approach of increasing conduit dimensions as well as the two novels swale and bio-retention systems. The strategies are then prioritised using a Multi-Criteria Decision Analysis (MCDA) method. The application of the proposed methodology is illustrated in the case study of urban storm water drainage systems in the Golestan City in Tehran Province for which a hydrological and hydraulic simulation model has been developed using the SWMM software. The results show that the swale system is the best strategy with an approximate cost of 20 billion Rials (almost US$ 6 million). Compared to the existing system in operation, the proposed system will be capable of reducing 59% of the quantitative risk of flooding (inundation) and 26% of the water quality risk (pollution loads).}, keywords = {Risk Assessment,Urban Flood,Runoff Pollution Sources,Multi Criteria Decision-Making,SWMM}, title_fa = {راهکارهای اصلاح شبکه زهکشی آب‌های سطحی شهری بر اساس معیارهای مبتنی بر ریسک}, abstract_fa = {اصلاح مناسب شبکه‌های موجود زهکشی آب‌های سطحی شهری سبب کاهش ریسک آب گرفتگی و حمل بار آلودگی توسط سیلاب می‌شود. بنابراین اتخاذ راهکارهای اصلاح سازگار با توسعه پایدار شهری نیازمند تحلیل ریسک‌های موجود کمی و کیفی آب در سیلاب شهری است. در این مقاله سه راهکار اصلاح این شبکه‌ها شامل یک راهکار سنتی (افزایش ابعاد کانال) و دو راهکار نوین (جوی باغچه و سیستم‌های ماند بیولوژیکی)، با استفاده از سه معیار شامل ریسک آب‌گرفتگی نقاط مختلف شبکه و ریسک آلاینده‌های سیلاب و هزینه اقتصادی بازسازی شبکه ارزیابی شدند. در نهایت این راهکارها با استفاده از روش تحلیل تصمیم‌گیری چند معیاره اولویت بندی ‌شدند. روش پیشنهادی برای مطالعه موردی سیستم زهکشی آب‌های سطحی شهر گلستان در استان تهران که مدل شبیه‌سازی هیدرولوژیکی و هیدرولیکی آن با استفاده از نرم‌افزار SWMM ساخته شده است، تشریح ‌شد. نتایج نشان می‌دهد که سیستم جوی‌باغچه می‌تواند به‌عنوان بهترین راهکار با هزینه تقریبی 20 میلیارد ریال معرفی شود که قادر به کاهش 59 درصدی ریسک کمی سیلاب (آب گرفتگی) و 26 درصدی ریسک کیفی (آلاینده‌ها) نسبت به شرایط موجود است.}, keywords_fa = {ارزیابی ریسک,سیلاب شهری,منابع آلودگی رواناب,تصمیم‌گیری چندمعیاره,SWMM}, url = {https://www.wwjournal.ir/article_11135.html}, eprint = {https://www.wwjournal.ir/article_11135_25aa7ef206b911c7dbbcad0ad485e04f.pdf} } @article { author = {Ghodsi, Narges and Nastaran, Mahin and Izadi, Ardalan}, title = {The Role of Water and Wastewater Networks in Urban Infill Development : A Case Study of District 1 of Isfahan Municipality}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {26}, number = {6}, pages = {30-41}, year = {2016}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {Social and physical decline of older inner city districts over time leads to the creation of deserted or inefficient areas in the heart of cities so that many such deteriorating land areas in cities remain undeveloped. The infill development strategy focuses on unused and deserted land areas in cities in an attempt to blow new life into old parts of cities aimed at urban sustainable development through optimally enhanced constructions and population density as well as striking a logical balance between density and land use change. Location of infill development can be assessed based on the excess capacity of urban water supply and wastewater collection infrastructure. In this study, EPANET, Sewer-Cad, Arc-GIS, Spatial Analysis, and AHP were employed to determine the potentials and capacity of the water and wastewater networks in District 1 of Isfahan Municipality as the zone selected for implementing infill development. The results obtained indicate that Khalaja and Darb Kooshk neighborhoods are of the highest priority due to their infrastructure excess capacity. The proposed method can lead to optimal use of missed opportunities and potential in urban areas, provide better inner city sites for future planning, and minimize unnecessary economic and social investments.}, keywords = {Infill development,Water and Wastewater Networks,spatial analysis}, title_fa = {نقش شبکه‌های آب و فاضلاب در توسعه میان‌‌افزا (مطالعه موردی : منطقه یک اصفهان)}, abstract_fa = {گسترش روزافزون بخش‌های قدیمی درون شهرها سبب رها شدن زمین‌های بسیاری در قلب شهرها و تبدیل آن‌ها به مکان‌هایی بی‌رونق و بی‌استفاده شده است. راهکار" توسعه میان افزا" با تأکید بر زمین‌های خالی و رها شده درون شهری، سعی دارد از طریق پرکردن بافت موجود شهر، افزایش متعادل تراکم و تغییر کاربری بناهای قدیمی به رشد و توسعه پایدار شهر دست یابد. یکی از مؤلفه‌های تأثیرگذار در مکان‌گزینی اراضی برای استقرار توسعه‌های میان افزا، قابلیت زیرساخت‌های موجود از جمله شبکه‌های آب و فاضلاب است. هدف از این پژوهش قابلیت‌سنجی شبکه‌های آب و فاضلاب در منطقه یک شهرداری اصفهان، به‌عنوان محدوده مطالعاتی بود که با استفاده از روش‌های تحلیل مکانی و تحلیل سلسله مراتبی و با به‌کارگیری نرم‌افزارهای EPANET،  Arc GIS و Sewer Cad صورت گرفت. پژوهش حاضر نشان داد که قابلیت بالاتر شبکه‌های آب و فاضلاب موجود در محلات خلجا و درب کوشک می‌تواند منجر به استفاده بهینه از فرصت‌های موجود در این محدوده‌ها شود و از این طریق، بستر لازم برای برنامه‌ریزی‌های آتی به‌منظور پاسخگویی به توسعه‌های جدید فراهم آید و از اتلاف سرمایه‌های اقتصادی و اجتماعی جلوگیری شود.}, keywords_fa = {توسعه میان‌افزا,شبکه‌های آب و فاضلاب,تحلیل مکانی}, url = {https://www.wwjournal.ir/article_11056.html}, eprint = {https://www.wwjournal.ir/article_11056_bde6627f172e4964fb57796d4b4fcf74.pdf} } @article { author = {Rahmani, Ali Reza and Amini, samira}, title = {Arsenic Removal from Aqueous Solutions Using Modified and Unmodified Oak Sawdust}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {26}, number = {6}, pages = {42-49}, year = {2016}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {In this research, oak sawdust, in both modified and unmodified forms, was used as an economical and low-cost material for the removal of arsenic from aqueous solutions. For this purpose, arsenic synthetic samples were prepared using NaAsO2 in distilled water and the effects of pH, adsorbent dosage, contact time, and initial As(V) concentration were investigated on As(V) adsorption using the adsorbents prepared. The results showed that modified sawdust achieved the highest efficiency (>91%) over a contact time of 60 min and at pH 7 when the adsorbent dosage was 4gr/L and the initial As(V) concentration was 150 µg/L. The data from both adsorbents fitted well to the Langmuir isotherm. Under optimum conditions (an initial As(V) concentration of 150 µg/L and optimal absorption pH, contact time, and adsorbent dosage), maximum As(V) removal efficiencies were 93.85% and 91.034% with the modified  and unmodified sawdust adsorbents, respectively. Given the availability and low cost of the adsorbent used and the high removal efficiency obtained at  lower adsorbent dosages and contact times, the modified oak sawdust may be recommended as an effective adsorbent for the removal of arsenic (v) from aqueous solutions, especially since it requires no need for pH modification.}, keywords = {Oak,Sawdust,ARSENIC,Aqueous solution}, title_fa = {حذف آرسنیک از محیط‌های آبی توسط خاک اره اصلاح شده و اصلاح نشده درخت بلوط}, abstract_fa = {در این تحقیق، خاک اره به‌عنوان ماده‌ای اقتصادی در حذف آرسنیک از محیط‌های آبی بررسی شد. در این مطالعه از خاک اره اصلاح شده و اصلاح نشده بلوط استفاده شد. نمونه آرسنیک مورد استفاده با اضافه کردن آرسنات سدیم در آب مقطر آماده شد و تأثیر pH، مقدار جاذب، زمان تماس و غلظت اولیه آرسنیک پنج ظرفیتی بر میزان جذب سطحی آرسنات توسط هر دو جاذب بررسی شد. نتایج نشان داد که خاک اره اصلاح شده با زمان تماس 60 دقیقه و در pH برابر 7، مقدار جاذب 4 گرم در لیتر و غلظت اولیه آرسنات 150 میکروگرم در لیتر، بیشترین راندمان جذب (بیشتر از 91 درصد) را داشت. داده‌های هر دو جاذب به‌خوبی از مدل لانگمیر تبعیت کرد. در شرایط بهینه با غلظت اولیه آرسنات 150 میکروگرم در لیتر و در pH، زمان تماس و دز جاذب بهینه، بیشترین میزان حذف توسط خاک اره اصلاح شده، 85/93 درصد به‌دست آمد. با توجه به بازدهی بالا در دز جاذب و زمان کمتر و عدم نیاز به اصلاح pH و همچنین قابلیت دسترسی و ارزان بودن خاک اره، استفاده از خاک اره اصلاح شده بلوط، به‌عنوان جاذبی مؤثر در حذف آرسنیک از محیط‌های آبی پیشنهاد می‌شود.}, keywords_fa = {بلوط,خاک اره,آرسنیک,محیط های آبی}, url = {https://www.wwjournal.ir/article_10691.html}, eprint = {https://www.wwjournal.ir/article_10691_194e708ceade3de78480e424a5032e22.pdf} } @article { author = {derayat, jamshid and jafarimotlagh, zeinab and pirsaheb, meghdad and zinatizadeh, aliakbar and Bazrafshan, Edris}, title = {Performanc of Electrocoagulation (Using Al Electrodes) in Surface Water Treatment}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {26}, number = {6}, pages = {50-59}, year = {2016}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {Access to safe drinking water is an important means of safeguarding public health. This cross-sectional study was designed to investigate the performance of electrocoagulation in the treatment of surface waters. For this purpose, water samples were taken from the intake to the Soleymanshah-Songhor Dam. Treatment was carried out in a reactor operating in the batch mode. Experiment runs were designed using the Design Expert Software (Stat-Ease Inc., Version 6.0.6) to investigate the effects of voltage (5-25), reaction time (20-60), temperature (10-30Ċ), and rapid mixing (200-400) on the Mn (II), Fe (II), hardness, alkalinity, and turbidity removal efficiencies as a result of treatment with aluminum electrodes. After the treatment process, the study parameters and the dissolved metal content due to the dissolution of the anode electrode were measured. Maximum removal efficiencies for Fe (II), Mn (II), hardness, and alkalinity were 96.2%, 94.6%, 26.6%, and 12.2%, respectively, while turbidity reduced from 0.6 to 0.15 NTU. Moreover, the dissolved Al content in the treated sample was found to be higher than the standard limit allowed for drinking water. Thus, the electrocoagulation process seems to be effective in the removal of the investigated contaminants from surface waters. However, the factor limiting the use of this method under maximum efficiency conditions is the dissolved metal content due to the dissolution of the anode electrode, which is a significant concern for the public health. In contrast, the electrocoagulation process seems to be an efficient and safe pretreatment method using aluminum electrodes if operated for achieving optimum efficiencies.}, keywords = {Electrocoagulation,Surface water,Aluminum Electrode,Water Treatment}, title_fa = {کارایی فرایند انعقاد الکتریکی در تصفیه آب سطحی با استفاده از الکترود آلومینیوم}, abstract_fa = {دسترسی به آب آشامیدنی سالم یکی از اهداف مهم برای حفظ بهداشت عمومی است. این پژوهش، یک مطالعه توصیفی- مقطعی بود که با هدف بررسی عملکرد فرایند انعقاد الکتریکی در تصفیه آب سطحی انجام شد. نمونه‌های آب از آبگیر سد سلیمانشاه سنقر تهیه شدند. فرایند تصفیه در یک راکتور به‌صورت ناپیوسته انجام شد. طراحی دوره‌های آزمایش با استفاده از نرم‌افزار دیزاین اکسپرت انجام شد. اثر متغیرهای پتانسیل الکتریکی (5 تا 25 ولت)، زمان واکنش (20 تا 60 دقیقه)، دما ( 10 تا 30 درجه سلسیوس) و دور همزن (200 تا 400 دور دقیقه) بر راندمان حذف آهن، منگنز، سختی، قلیائیت و کدورت از آب سطحی با استفاده از الکترود آلومینیوم بررسی شد. بعد از تصفیه، پارامترهای مورد مطالعه و مقادیر فلز محلول ناشی از آزادسازی الکترود آند اندازه‌گیری شد. در تصفیه با فرایند انعقاد الکتریکی حداکثر راندمان حذف آهن 2/96 درصد، منگنز 6/94 درصد، سختی 6/26 درصد و قلیائیت 2/12 درصد به‌دست آمد و کدورت از 6/0 به NTU15/0 کاهش یافت. در این شرایط مقدار فلز محلول آلومینیوم بیشتر از سطح استاندارد آب آشامیدنی بود. نتایج نشان داد که فرایند انعقاد الکتریکی در حذف پارامترهای مورد بررسی از آب سطحی مؤثر است. مقدار فلز محلول در اثر انحلال الکترود آند حائز اهمیت بهداشتی است و استفاده از این روش را در شرایط حداکثر راندمان حذف محدود می‌کند. در شرایط بهینه، فرایند انعقاد الکتریکی با الکترودهای آلومینیوم، یک روش پیش‌تصفیه مناسب است.}, keywords_fa = {انعقاد الکتریکی,آب سطحی,الکترود آلومینیوم,تصفیه آب}, url = {https://www.wwjournal.ir/article_10912.html}, eprint = {https://www.wwjournal.ir/article_10912_984c24509e568a26cec2bf3cd28b5a4f.pdf} } @article { author = {Fadaei-tehrani, Mohammadreza and Vossoughi, Manoochehr and shamsai, Abolfazl and MahinKhaki, Neda}, title = {In-situ Lead Removal by Iron Nano Particles Coated with Nickel}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {26}, number = {6}, pages = {60-68}, year = {2016}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {This study investigates the potential of nano-zero-valent iron particles coated with nickel in the removal of lead (Pb2+) from porous media. For this purpose, the nano-particles were initially synthesized and later stablilized using the strach biopolymer prior to conducting batch and continuous experiments. The results of the batch experiments revealed that the reaction kinetics fitted well with the pseudo-first-order adsorption model and that the reaction rate ranged from 0.001 to 0.035 g/mg/min depending on solution pH and the molar ratio of Fe/Pb. Continuous experiments showed that lead remediation was mostly influenced not only by seepage velocity but also by the quantity and freshness of nZVI as well as the grain type of the porous media. Maximum Pb2+ removal rates obtained in the batch and lab models were 95% and 80%, respectively. Based on the present study, S-nZVI may be suggested as an efficient agent for in-situ remediation of groundwater contaminated with lead.}, keywords = {nZVI/Ni,Lead Pb2+,In-situ remediation,Groundwater}, title_fa = {تصفیه درجای آلاینده سرب توسط نانوذرات آهن با روکش نیکل}, abstract_fa = {در این پژوهش توانایی نانوذرات دو فلزی آهن با روکش نیکل در تصفیه درجای آب آلوده به سرب دو ظرفیتی مطالعه شد. ابتدا نانوذرات سنتز شد و سوسپانسیون آن به‌کمک بیوپلیمر نشاسته پایدار شد و سپس آزمایش‌های ارزیابی توانایی آن برای حذف آلاینده سرب در دو گروه جریان منقطع و جریان پیوسته انجام گرفت. بر اساس نتایج آزمایش‌های منقطع، واکنش حذف سرب دو ظرفیتی بر مدل شبه‌ مرتبه ‌اول انطباق داشته و ثابت سرعت واکنش آن به‌صورت تابعی از pH محلول و نسبت استکیومتری بین آهن و سرب، در محدوده 01/0 تا 035/0 گرم/میلی‌گرم/دقیقه تغییرات داشت. بر مبنای آزمایش‌های جریان پیوسته سرعت تراوش، مقدار و تازگی نانوذرات آهن و نوع دانه‌های محیط متخلخل متغیرهای اصلی تأثیرگذار در حذف درجای سرب دو ظرفیتیمحسوب می‌شوند. حداکثر راندمان حذف سرب دو ظرفیتی در آزمایش‌های منقطع و جریان پیوسته در مدل آزمایشگاهی به‌ترتیب 95 و 80 درصد به‌دست آمد. بر اساس یافته‌های این پژوهش، نانوذرات آهن با روکش نیکل، برای تصفیه درجای آب زیرزمینی آلوده به سرب دو ظرفیتی،کارایی بالایی ندارند.}, keywords_fa = {نانوذرات آهن با روکش نیکل,آلاینده سرب,تصفیه درجا,آب زیرزمینی}, url = {https://www.wwjournal.ir/article_10911.html}, eprint = {https://www.wwjournal.ir/article_10911_46669a48f05dbae5c32d3162553db631.pdf} } @article { author = {shahsavan, somayeh and Sadeghi, Mehraban and Fadae, Abdolmajid and Sedehi, Morteza and razavi, Tahere}, title = {Optimization of Aqueous Phenol Treatment with Persulfate in the Presence of Iron}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {26}, number = {6}, pages = {69-75}, year = {2016}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = { Phenolic compounds are among the priority pollutants due to their adverse effects on human health and other living organisms. Advanced Oxidation Processes (AOPs) offer promising prospects for the removal of pollutants in water and wastewater due to their high efficiency as well as acceptable health and environmental effects. Persulfate, especially when used with iron, is far stronger than many other oxidants with respect to oxidation properties since it produces sulfate radicals which create a higher oxidation potential. In this research, efforts have been made to achieve the best conditions for phenol removal from aqueous environments by activating persulfate with iron ions. The experimental design was accomplished using the Taguchi statistical method and the Minitab 16 software. For the purposes of this study, four factors, each with five levels, were considered to determine the optimal conditions for phenol removal. The optimum conditions for phenol removal by integrated persulfate/iron ions were found to comprise a contact time of 120 minutes, a persulfate/iron molar ratio of 5/4, and PH=3. Phenol removal efficiencies of 94.93%±0.708 and 58.21%±0.675 were obtained under the optimum conditions for the experimental minimum (50 mg/l) and maximum (750 mg/l) phenol concentrations, respectively. The results revealed that among the parameters affecting the process, environmental pH with 54.80% and persulfate concentration with 11.05% have the highest and lowest effects, respectively. It is expected that this process is also capable of removing phenol from industrial wastewaters with removal efficiencies in the range of 59‒95%.  }, keywords = {Persulfate/iron Process,free radicals,Aqueous Environment,Phenol,Organic Materials}, title_fa = {بهینه‌سازی تصفیه فنل آبی با پرسولفات در حضور یون آهن}, abstract_fa = {ترکیبات فنلی در بین آلاینده‌های دارای تقدم قرار می‌گیرند و اثرات سوء بر سلامت انسان و موجودات زنده دارند. فرایندهای اکسیداسیون پیشرفته به لحاظ بازده بسیار بالا، جنبه‌های بهداشتی و محیط‌ زیستی مطلوب، از چشم‌انداز مطلوبی در حذف آلاینده‌ها در آب و فاضلاب برخوردار هستند. پرسولفات از نظر اکسیدکنندگی، نسبت به بسیاری از اکسیدکننده‌ها قوی‌تر است، به‌ویژه وقتی همراه با آهن به‌کار رود باعث تولید رادیکال‌های سولفات می‌شود که پتانسیل اکسیداسیون بالاتری را ایجاد خواهد کرد. در این پژوهش سعی شد با فعال‌سازی پرسولفات با یون آهن بهترین شرایط برای حذف فنل از محیط‌های آبی به‌دست آید. طرح آزمایش‌ها بر اساس روش آماری تاگوچی و با استفاده از نرم‌افزار مینی‌تب 16 انجام شد. چهار عامل و هر کدام با پنج سطح برای تعیین شرایط بهینه حذف فنل در نظر گرفته شد. زمان تماس 120 دقیقه، نسبت مولار پرسولفات به آهن 5:4 و pH برابر 3 ، شرایط بهینه تصفیه فنل با اکسیداسیون پرسولفات/یون آهن بود. میزان حذف فنل در شرایط بهینه برای غلظت‌های 50 تا 750 میلی‌گرم در لیتر فنل به‌ترتیب 708/0±93/94 و 675/0±21/58 درصد به‌دست آمد. نتایج نشان داد که در بین پارامترهای مؤثر بر این فرایند، pH محیط با 80/54 درصد بیشترین و غلظت پرسولفات با 05/11 درصد کمترین عامل مؤثر بودند. با کاربرد این فرایند می‌توان میزان فنل با غلظت‌هایی که در فاضلاب‌های صنعتی یافت می‌شود را بین 59 تا 95 درصد حذف کرد.}, keywords_fa = {فرایند پرسولفات/آهن,رادیکال‌های آزاد,محیط‌های آبی,فنل,مواد آلی}, url = {https://www.wwjournal.ir/article_11074.html}, eprint = {https://www.wwjournal.ir/article_11074_4532c4ca4604069857e9d548621cf551.pdf} } @article { author = {Hassanshahian, Mehdi and Karimi, Maryam and Emami, Zarrindokht}, title = {Isolation, Identification and Characterization of Two Phenol-Degrading Species of Trichosporon Isolated from Wastewater of Zarand Coking Plant -Kerman}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {26}, number = {6}, pages = {76-83}, year = {2016}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {Phenol and phenolic compounds are environmental contaminants that are commonly found in industrial effluents from oil refineries, coal mines, and petrochemical plants. Phenol removal from industrial effluent is, therefore, of extreme importance for environmental protection. Phenol degradation is commonly accomplished by physicochemical methods that are not only costly but also produce hazardous metabolites. Recently, phenol biodegradation has attracted much attention due to its lower process cost. In this study, yeast, as a phenol-degrading agent, was initially isolated from samples in the surrounding environment (soil and water) taken from Zarand coking plant. The total heterotrophic and biodegrading yeasts were then counted. Compared to effluent samples, soil samples were found to exhibit higher yeast degrader counts. Yeast growths were measured after three passages and the two strains K1 and K11 were recorded as the ones with the highest growth rates. These same yeasts were the ones capable of removing phenol as evidenced by the remaining phenol content measured by the Gibbs reagent. The effects of four different phenol concentrations (0.1, 0.125, 0.2, and 0.275) were activities were measured in all the eleven yeasts isolated. Finally, part of the 18S rRNA gene section was cultured using primers (Euk-A, Euk-B) especially used for this gene and a series of biochemical tests were run for the molecular identification of the yeasts predominantly involved in phenol degradation. The sequences obtained were compared against the available gene banks and the highest homology (greater than 98%) was introduced as the genus and species of phenol degrader yeasts. The isolated yeasts belonged to the genera Trichosporon montevideense and Trichosporon cutaneum.  }, keywords = {Biodegradation,Phenol,Coal Tar,Yeast}, title_fa = {جداسازی، شناسایی و تعیین ویژگی دو گونه تریکوسپورون مخمری تجزیه کننده فنل جداسازی شده از پساب کارخانه کک‌سازی زرند کرمان}, abstract_fa = {فنل و ترکیبات فنلی، آلوده‌کننده‌های محیطی هستند که در پساب صنایع مختلف از جمله زغال سنگ، پالایشگاه‌های نفت، کارخانه‌های فراورده‌های شیمیایی و پتروشیمی وجود دارند. حذف فنل از خروجی پساب صنایع اهمیت زیادی در حفظ محیط زیست دارد. تجزیه فنل، معمولاً به‌وسیله روش‌های فیزیکوشیمیایی صورت می‌گیرد، اما این روش‌ها هزینه‌بر بوده و واسطه‌های خطرناک تولید می‌کنند.تجزیه بیولوژیکی فنل در سال‌های اخیر مورد توجه قرار گرفته است. از بین میکروارگانیسم‌ها، مخمرها اهمیت خاصی در تجزیه فنل دارند. در این پژوهش، مخمرهای تجزیه‌کننده فنل ابتدا از نمونه‌های محیطی (خاک و پساب ) کارخانه کک‌سازی زرند کرمان جداسازی شد. سپس کل مخمرهای هتروتروف و تجزیه‌کننده شمارش شدند که نمونه‌های خاک، دارای میزان بالاتری از مخمرهای تجزیه‌کننده نسبت به نمونه‌های پساب بودند. پس از سه بار پاساژ دادن مخمرها، میزان رشد آنها اندازه‌گیری شد که مخمرهای K1 و K11 دارای بیشترین میزان رشد بودند. همچنین همین مخمرها قادر به حذف فنل بودند که سنجش آن توسط معرف گیبس صورت گرفت. سپس اثر چهار غلظت مختلف فنل (05/0، 125/0، 2/0 و 275/0 گرم در لیتر) بررسی شد و دو الگوی تجزیه‌ای در این مخمرها مشاهده شد. همچنین مقدار فعالیت امولسیون‌کنندگی و هیدروفوبیسیته هر یازده مخمر اندازه‌گیری شد. در نهایت پس از یک‌سری آزمون‌های بیوشیمیایی، شناسایی مولکولی مخمرهای قوی در تجزیه فنل با تکثیر قسمتی از ناحیه ژنی 18S rRNA با پرایمرهای ویژه این ژن (Euk-A, Euk-B) انجام شد. توالی حاصله علیه بانک‌های ژنی مقایسه شد و بالاترین همولوژی ( بالاتر از 98 درصد) به‌عنوان جنس و گونه مخمر تجزیه‌کننده تعیین شد. مخمرهای جداسازی شده مربوط به جنس‌های تریکوسپورون مونتاویدینس و تریکوسپورون کوتانئوم  بودند.}, keywords_fa = {تجزیه زیستی,فنل,زغال سنگ,مخمر}, url = {https://www.wwjournal.ir/article_11057.html}, eprint = {https://www.wwjournal.ir/article_11057_216de04aa341a44eca97881100a30737.pdf} } @article { author = {Takdastan, Afshin and Eslami, Azadeh and Mehrdadi, Nasser}, title = {Effects of Sludge Holding Tank on the Effluent Quality and Sludge Settling Potential in Conventional Activated Sludge}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {26}, number = {6}, pages = {84-91}, year = {2016}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {Excess sludge treatment and disposal is a major challenge for wastewater treatment plants worldwide. In this study, sludge reduction was evaluated using pilot scale sequencing batch reactors (SBRs). Two SBRs were operated alongside each other over a period of 12 months during which time measurements were performed to determine COD, MLSS, MLVSS, pH, DO, SV1, SOUR, and ORP. The results showed that among the different SRT durations (5, 10, 15, 20, 25 days), the 10-day sludge retention time yielded maximum COD removal efficiency (90%) without any bulking or foaming problems. Prior to any reactions taking place in the reactor, the sludge was exposed to various oxidation reduction potentials for 1 to 8 hours in order to determine the effects of uncoupling metabolism on biomass production under different anoxic and anaerobic conditions. COD was observed to decrease from 600 to 33 mg/l while MLSS increased from 1350 to 1500 mg/l over a retention time of 7 hours and for an ORP value of -238 mv. The effluent COD obtained as a result of operating this process was below the limits set by environmental regulations for surface waters and reuse in agriculture. For an ORP value of -238mv, SOUR and SVI were measured to be 22 mgO2/h.gVSS and 40 ml/g, respectively.}, keywords = {Activated sludge,Sludge Holding Tank,effluent quality,Excess Sludge Minimization}, title_fa = {اثر احداث تانک ذخیره‌سازی در سیستم متعارف لجن فعال بر کیفیت پساب خروجی و قابلیت ته‌نشینی لجن}, abstract_fa = {تصفیه و دفع لجن مازاد یک چالش بزرگ در تصفیه‌خانه‌های فاضلاب است. در این تحقیق کاهش حجم لجن در راکتور ناپیوسته متوالی در مقیاس پایلوت بررسی شد. دو راکتور ناپیوسته متوالی در مدت زمان ۱۲ ماه بهره‌برداری شد و پارامترهایی از قبیل COD، MLSS، pH، DO، SVI، SOUR، ORP در طول مدت بهره‌برداری راکتور مورد آزمایش قرار گرفت. نتایج نشان داد که در بین زمان‌های ماند سلولی مختلف (۵، ۱۰، ۱۵، ۲۰ ۲۵ روز) در زمان ماند ۱۰ روز بهترین راندمان حذف COD (۹۵ درصد) بدون مشکلات بالکینگ و همچنین تولید کف ایجاد شد. به‌منظور بررسی اثر متابولیسم جفت نشده فاز آنوکسیک و بی‌هوازی لجن بر کاهش تولید بیومس، لجن فاضلاب برای مدت ۱ تا ۴ ساعت قبل از فاز واکنش در راکتور با پتانسیل اکسیداسیون و احیای مختلف نگهداری شد. نگهداری لجن بعد از مدت چهار ساعت با پتانسیل اکسیداسیون و احیای 238- میلی‌ولت میزان COD را از ۶۰۰ به ۳۳ میلی‌گرم در لیتر کاهش داد و غلظت MLSS به‌طور جزئی از ۱۳۵۰ به ۱۵۰۰ میلی‌گرم در لیتر افزایش یافت. با استفاده از این مکانیسم، COD پساب خروجی پایین‌تر از استاندارد محیط‌ زیست از نظر دفع پساب به آب‌های پذیرنده و استفاده مجدد در کشاورزی است. از طرفی در پتانسیل اکسیداسیون و احیای برابر 238- میلی‌ولت، میزان  SOUR به mgO2/h.gVSS ۲۲ و میزانSVI به کمتراز ۴۰میلی‌لیتر بر گرم رسید.}, keywords_fa = {لجن فعال,تانک ذخیره‌سازی,کیفیت پساب,کاهش حجم لجن}, url = {https://www.wwjournal.ir/article_10584.html}, eprint = {https://www.wwjournal.ir/article_10584_534a7a72be025d33cdea74a02e4e8274.pdf} } @article { author = {Basiri parsa, Jalal and Rezaei Vahidian, Hadi and Soleymani, Alireza}, title = {Treatment of Synthetic Wastewater Containing AB14 Pigment by Electrooxidation in both Pilot and Bench Scale Reactors}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {26}, number = {6}, pages = {92-99}, year = {2016}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {The electrochemical oxidation process was used for the degradation of Acid Brown 14 in both bench and pilot scale reactors. The bench scale one with a working volume of 0.5 L was equipped with platinum plate used as the anode and stainless steel (SS-304) plates as the cathode. The pilot scale reactor had a volume of 9 L and was equipped with SS-304 plates used as both the anode and the cathode. Experiments were run using these reactors to investigate the two parameters of energy consumption and anode efficiency. The bench scale reactor was capable of removing 92% and 36% of the dye and COD, respectively, after 18 min of operation. The pilot scale reactor, however, was capable of removing 87% and 59% of the dye and the COD content, respectively, after 60 min of operation. The kinetic study of both the bench and pilot reactors for dye and COD removals showed that both processes followed a zero order kinetic.}, keywords = {Dyestuff Effluent,Electrooxidation,Electrocoagulation,Pilot Scale Reactor}, title_fa = {فرایند تصفیه پساب سنتزی حاوی رنگزای AB14 به روش اکسایش الکتریکی در راکتور آزمایشگاهی و پایلوت}, abstract_fa = {در این تحقیق از فرایند اکسایش الکتریکی در دو راکتور آزمایشگاهی و پایلوت برای حذف رنگ اسید قهوه‌ای 14 استفاده شد. راکتور آزمایشگاهی با حجم 5/0 لیتر مجهز به الکترود پلاتین به‌عنوان آند و الکترود استیل 304 به‌عنوان کاتد بوده و راکتور پایلوت با حجم 9 لیتر مجهز به الکترود استیل 304 به‌عنوان کاتد و آند بود. در این فرایند پارامترهای انرژی مصرفی و بازده آندی بررسی شدند. در راکتور آزمایشگاهی بعد از 18 دقیقه از انجام فرایند حذف رنگ و COD به‌ترتیب برابر 92 درصد و 36 درصد بوده و در راکتور پایلوت بعد از 60 دقیقه از انجام فرایند حذف رنگ و COD به ترتیب 87 درصد و 59 درصد به‌دست آمد. مطالعات سینتیکی بر اساس حذف رنگ و COD نشان داد که در هر دو راکتور آزمایشگاهی و پایلوت سینتیک فرایند از مرتبه صفر پیروی می‌کند.}, keywords_fa = {پساب رنگی,اکسایش الکتریکی,انعقاد الکتریکی,راکتور پایلوت}, url = {https://www.wwjournal.ir/article_10692.html}, eprint = {https://www.wwjournal.ir/article_10692_8520e9c2bb066af5a718d68b1a53abf4.pdf} } @article { author = {Eslami, hadi and Ghelmani, Seyyed Vahid and Salehi Vaziri, Akbar and Hosseinshahi, Davood and Ghaleaskari, Sahar and Talebi- Hemmatabadi, Parvaneh and Merajimoghadam, Tahereh}, title = {Comparing the Efficiency of Stabilization Ponds and Subsurface Constructed Wetland in Domestic Sewage Treatment in City of Yazd}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {26}, number = {6}, pages = {100-106}, year = {2016}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {Wastewater is one of the most important contributors to water pollution on the one hand, while it has the potential to serve as an alternative source of water if subjected to proper treatment, on the other. The present study was designed to compare the removal efficiencies of stabilization ponds and subsurface constructed wetlands in the treatment of urban wastewater in Yazd. For this purpose, 72 samples were collected at the inlet and outlet of a constructed wetland as well as 72 from the inlet and outlet of stabilization ponds over a period of one year. The samples were subjected to identical tests and the results were compared. The removal efficiencies for BOD5, COD, TSS, NH4-N, NO3-N, and PO4 in the stabilization ponds were 79.7, 79.6, 44.4, 57, 0, and 42.5 percent, respectively. The same parameters for the constructed wetland system were 80.7, 81.5, 77.7, 9.9, 34, and 59.4, respectively. Moreover, BOD5, COD, TSS, and PO4 removal efficiencies were higher in autumn and summer. From these results, it may be concluded that constructed wetlands are more commercially viable than stabilization ponds both in terms of performance and cost-effectiveness.}, keywords = {Stabilization Ponds,Constructed Wetland,Sewage Treatment}, title_fa = {مقایسه عملکرد برکه‌های تثبیت و تالاب مصنوعی با جریان زیر سطحی در تصفیه فاضلاب شهری در یزد}, abstract_fa = {فاضلاب از یک سو مهم‌ترین عامل آلودگی آب به‌شمار می‌رود و از سوی دیگر در صورت تصفیه با روشی مناسب می‌تواند به‌عنوان یکی از منابع جایگزین آب محسوب شود. این پژوهش با هدف مقایسه عملکرد برکه‌های تثبیت و تالاب مصنوعی زیر سطحی در تصفیه فاضلاب شهری در شهر یزد انجام شد. در این پژوهش تعداد 72 نمونه از ورودی و خروجی تالاب و 72 نمونه از ورودی و خروجی برکه‌های تثبیت به‌مدت یک سال برداشت شده و مورد آزمایش و مقایسه قرار گرفت. داده‌های به‌دست آمده نشان داد که راندمان حذف BOD5، COD، TSS، NH4-N، NO3-N و PO4 در برکه‌های تثبیت به ترتیب 7/79، 6/79، 4/44، 57، 0 و 5/42 درصد و در تالاب مصنوعی به‌ترتیب 8/80، 5/81، 7/77، 9/9، 34 و 4/59 درصد بوده است. نتایج نشان داد که راندمان حذف BOD5، COD،  TSSو PO4 در فصل‌های پاییز و تابستان بیشتر از سایر فصول بوده است. بنابراین می‌توان گفت که تالابها هم از لحاظ کارایی و هم از لحاظ اقتصادی مقرون به صرفه‌تر از برکه‌های تثبیت هستند.}, keywords_fa = {برکه‌های تثبیت,تالاب مصنوعی,تصفیه فاضلاب}, url = {https://www.wwjournal.ir/article_10585.html}, eprint = {https://www.wwjournal.ir/article_10585_69673f1760f50519c6de42cce7902302.pdf} } @article { author = {Yargholi, Bahman}, title = {Investigation of Cd Uptake and Transfer in Different Parts of Wheat, Spinach, Cucumber and Carrot Crops}, journal = {Journal of Water and Wastewater; Ab va Fazilab ( in persian )}, volume = {26}, number = {6}, pages = {107-114}, year = {2016}, publisher = {Water and Wastewater Consulting Engineers}, issn = {1024-5936}, eissn = {2383-0905}, doi = {}, abstract = {Environmental pollution due to the accumulation of heavy metals in soil and their subsequent transfer to crops is a global concern that arises from improper application of industrial wastewaters. This study was conducted to investigate the effects of different levels of soil Cd on its accumulation rate in the various organs of four common crops in Iran (namely, wheat, spinach, cucumber, and carrot). The experiment was performed in a factorial design with random blocks including 3 treatments with 0 (control), 50, and 100 mg/kg.soil in 4 replicates. Soil was collected from the farm belonging to the Research Institute for Plant and Seed Breeding (Karaj) and filtered twice using 2-mm sieves before Cadmium Nitrate (Cd(NO3)2) was added and completely mixed. Crops were planted in plastic pots 40 cm in diameter and 60 cm in height. The water demand was determined using the Jenman Mantite method. At the end of the growing season, samples were taken from various organs of the crops and their Cd concentrations were measured. The results revealed a direct relationship between Cd accumulation and Cd concentration in the root region. All the treatments other than the control exhibited Cd concentrations higher than the standard limits for human consumption. Cadmium accumulation in the different organs of the crops exhibited the following orders: Root: Cucumber